Subject: [PATCH v2 3/3] arm64: allwinner: a64: enable Bluetooth On Pinebook

From: Bastian Germann <[email-masked]>
Date: Tue, 24 May 2022 23:21:54 +0200

From: Vasily Khoruzhick <[email-masked]>

Pinebook has an RTL8723CS WiFi + BT chip, BT is connected to UART1
and uses PL5 as device wake GPIO, PL6 as host wake GPIO the I2C
controlling signals are connected to R_I2C bus.

Enable it in the device tree.

Signed-off-by: Vasily Khoruzhick <[email-masked]>
[add uart-has-rtscts]
Signed-off-by: Bastian Germann <[email-masked]>
---
 .../boot/dts/allwinner/sun50i-a64-pinebook.dts      | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index 63571df24da4..70d823f8c837 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -406,6 +406,19 @@ &uart0 {
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723cs-bt";
+		device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+		host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	};
+};
+
 &usb_otg {
 	dr_mode = "host";
 };
-- 
2.36.1