Subject: [PATCH net-next v5 5/6] dsa: lan9303: Determine CPU port based on dsa_switch ptr

From: Jerry Ray <[email-masked]>
Date: Fri, 9 Dec 2022 16:47:12 -0600

In preparing to move the adjust_link logic into the phylink_mac_link_up
api, change the macro used to check for the cpu port.

Signed-off-by: Jerry Ray <[email-masked]>
---
 drivers/net/dsa/lan9303-core.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index 694249aa1f19..1d22e4b74308 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -1064,7 +1064,11 @@ static void lan9303_adjust_link(struct dsa_switch *ds, int port,
 	struct lan9303 *chip = ds->priv;
 	int ctl;
 
-	if (!phy_is_pseudo_fixed_link(phydev))
+	/* On this device, we are only interested in doing something here if
+	 * this is the CPU port. All other ports are 10/100 phys using MDIO
+	 * to control there link settings.
+	 */
+	if (!dsa_is_cpu_port(ds, port))
 		return;
 
 	ctl = lan9303_phy_read(ds, port, MII_BMCR);
-- 
2.17.1