Subject: [net 06/12] net/mlx5e: IPoIB, Don't allow CQE compression to be turned on by default

From: Saeed Mahameed <[email-masked]>
Date: Wed, 28 Dec 2022 11:43:25 -0800

From: Dragos Tatulea <[email-masked]>

mlx5e_build_nic_params will turn CQE compression on if the hardware
capability is enabled and the slow_pci_heuristic condition is detected.
As IPoIB doesn't support CQE compression, make sure to disable the
feature in the IPoIB profile init.

Please note that the feature is not exposed to the user for IPoIB
interfaces, so it can't be subsequently turned on.

Fixes: b797a684b0dd ("net/mlx5e: Enable CQE compression when PCI is slower than link")
Signed-off-by: Dragos Tatulea <[email-masked]>
Reviewed-by: Gal Pressman <[email-masked]>
Signed-off-by: Saeed Mahameed <[email-masked]>
---
 drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
index 7c5c500fd215..2c73c8445e63 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
@@ -71,6 +71,10 @@ static void mlx5i_build_nic_params(struct mlx5_core_dev *mdev,
 	params->packet_merge.type = MLX5E_PACKET_MERGE_NONE;
 	params->hard_mtu = MLX5_IB_GRH_BYTES + MLX5_IPOIB_HARD_LEN;
 	params->tunneled_offload_en = false;
+
+	/* CQE compression is not supported for IPoIB */
+	params->rx_cqe_compress_def = false;
+	MLX5E_SET_PFLAG(params, MLX5E_PFLAG_RX_CQE_COMPRESS, params->rx_cqe_compress_def);
 }
 
 /* Called directly after IPoIB netdevice was created to initialize SW structs */
-- 
2.38.1