Subject: [PATCH v3 1/2] net: fec: restore handling of PHY reset line as optional

From: Dmitry Torokhov <[email-masked]>
Date: Wed, 1 Feb 2023 13:53:19 -0800

Conversion of the driver to gpiod API done in 468ba54bd616 ("fec:
convert to gpio descriptor") incorrectly made reset line mandatory and
resulted in aborting driver probe in cases where reset line was not
specified (note: this way of specifying PHY reset line is actually
deprecated).

Switch to using devm_gpiod_get_optional() and skip manipulating reset
line if it can not be located.

Fixes: 468ba54bd616 ("fec: convert to gpio descriptor")
Signed-off-by: Dmitry Torokhov <[email-masked]>
---

v3: removed handling of 'phy-reset-active-high', it was moved to patch #2
v2: dropped conversion to generic device properties from the patch

 drivers/net/ethernet/freescale/fec_main.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 2716898e0b9b..00115b55d0ff 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -4056,12 +4056,15 @@ static int fec_reset_phy(struct platform_device *pdev)
 
 	active_high = of_property_read_bool(np, "phy-reset-active-high");
 
-	phy_reset = devm_gpiod_get(&pdev->dev, "phy-reset",
+	phy_reset = devm_gpiod_get_optional(&pdev->dev, "phy-reset",
 			active_high ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW);
 	if (IS_ERR(phy_reset))
 		return dev_err_probe(&pdev->dev, PTR_ERR(phy_reset),
 				     "failed to get phy-reset-gpios\n");
 
+	if (!phy_reset)
+		return 0;
+
 	if (msec > 20)
 		msleep(msec);
 	else
-- 
2.39.1.456.gfc5497dd1b-goog