Subject: [PATCH net-next v4 6/7] bnxt: use new queue try_stop/try_wake macros

From: Jakub Kicinski <[email-masked]>
Date: Thu, 6 Apr 2023 18:25:35 -0700

Convert bnxt to use new macros rather than open code the logic.
Two differences:
(1) bnxt_tx_int() will now only issue a memory barrier if it sees
    enough space on the ring to wake the queue. This should be fine,
    the mb() is between the writes to the ring pointers and checking
    queue state.
(2) we'll start the queue instead of waking on race, this should
    be safe inside the xmit handler.

Reviewed-by: Michael Chan <[email-masked]>
Signed-off-by: Jakub Kicinski <[email-masked]>
---
v3:
 - no change
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 40 ++++-------------------
 1 file changed, 7 insertions(+), 33 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 8ff5a4f98d6f..de97bee25249 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -56,6 +56,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <net/page_pool.h>
 #include <linux/align.h>
+#include <net/netdev_queues.h>
 
 #include "bnxt_hsi.h"
 #include "bnxt.h"
@@ -331,26 +332,6 @@ static void bnxt_txr_db_kick(struct bnxt *bp, struct bnxt_tx_ring_info *txr,
 	txr->kick_pending = 0;
 }
 
-static bool bnxt_txr_netif_try_stop_queue(struct bnxt *bp,
-					  struct bnxt_tx_ring_info *txr,
-					  struct netdev_queue *txq)
-{
-	netif_tx_stop_queue(txq);
-
-	/* netif_tx_stop_queue() must be done before checking
-	 * tx index in bnxt_tx_avail() below, because in
-	 * bnxt_tx_int(), we update tx index before checking for
-	 * netif_tx_queue_stopped().
-	 */
-	smp_mb();
-	if (bnxt_tx_avail(bp, txr) >= bp->tx_wake_thresh) {
-		netif_tx_wake_queue(txq);
-		return false;
-	}
-
-	return true;
-}
-
 static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct bnxt *bp = netdev_priv(dev);
@@ -384,7 +365,8 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (net_ratelimit() && txr->kick_pending)
 			netif_warn(bp, tx_err, dev,
 				   "bnxt: ring busy w/ flush pending!\n");
-		if (bnxt_txr_netif_try_stop_queue(bp, txr, txq))
+		if (!netif_txq_try_stop(txq, bnxt_tx_avail(bp, txr),
+					bp->tx_wake_thresh))
 			return NETDEV_TX_BUSY;
 	}
 
@@ -614,7 +596,8 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (netdev_xmit_more() && !tx_buf->is_push)
 			bnxt_txr_db_kick(bp, txr, prod);
 
-		bnxt_txr_netif_try_stop_queue(bp, txr, txq);
+		netif_txq_try_stop(txq, bnxt_tx_avail(bp, txr),
+				   bp->tx_wake_thresh);
 	}
 	return NETDEV_TX_OK;
 
@@ -708,17 +691,8 @@ static void bnxt_tx_int(struct bnxt *bp, struct bnxt_napi *bnapi, int nr_pkts)
 	netdev_tx_completed_queue(txq, nr_pkts, tx_bytes);
 	txr->tx_cons = cons;
 
-	/* Need to make the tx_cons update visible to bnxt_start_xmit()
-	 * before checking for netif_tx_queue_stopped().  Without the
-	 * memory barrier, there is a small possibility that bnxt_start_xmit()
-	 * will miss it and cause the queue to be stopped forever.
-	 */
-	smp_mb();
-
-	if (unlikely(netif_tx_queue_stopped(txq)) &&
-	    bnxt_tx_avail(bp, txr) >= bp->tx_wake_thresh &&
-	    READ_ONCE(txr->dev_state) != BNXT_DEV_STATE_CLOSING)
-		netif_tx_wake_queue(txq);
+	__netif_txq_maybe_wake(txq, bnxt_tx_avail(bp, txr), bp->tx_wake_thresh,
+			       READ_ONCE(txr->dev_state) != BNXT_DEV_STATE_CLOSING);
 }
 
 static struct page *__bnxt_alloc_rx_page(struct bnxt *bp, dma_addr_t *mapping,
-- 
2.39.2