Subject: [PATCH net-next v4 2/5] net: phy: c45: add support for 1000BASE-T1 forced setup

From: Stefan Eichenberger <[email-masked]>
Date: Wed, 19 Jul 2023 08:42:55 +0200

Add support to force 1000BASE-T1 by setting the correct control bit in
the MDIO_MMD_PMA_PMD_BT1_CTRL register.

Signed-off-by: Stefan Eichenberger <[email-masked]>
Reviewed-by: Andrew Lunn <[email-masked]>
---
 drivers/net/phy/phy-c45.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index 93ed072233779..b73c428a15663 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -108,7 +108,7 @@ EXPORT_SYMBOL_GPL(genphy_c45_pma_baset1_setup_master_slave);
  */
 int genphy_c45_pma_setup_forced(struct phy_device *phydev)
 {
-	int ctrl1, ctrl2, ret;
+	int bt1_ctrl, ctrl1, ctrl2, ret;
 
 	/* Half duplex is not supported */
 	if (phydev->duplex != DUPLEX_FULL)
@@ -176,6 +176,15 @@ int genphy_c45_pma_setup_forced(struct phy_device *phydev)
 		ret = genphy_c45_pma_baset1_setup_master_slave(phydev);
 		if (ret < 0)
 			return ret;
+
+		bt1_ctrl = 0;
+		if (phydev->speed == SPEED_1000)
+			bt1_ctrl = MDIO_PMA_PMD_BT1_CTRL_STRAP_B1000;
+
+		ret = phy_modify_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_PMD_BT1_CTRL,
+				     MDIO_PMA_PMD_BT1_CTRL_STRAP, bt1_ctrl);
+		if (ret < 0)
+			return ret;
 	}
 
 	return genphy_c45_an_disable_aneg(phydev);
-- 
2.39.2