Subject: [PATCH v2] dt-bindings: net: ftgmac100: convert to yaml version from txt

From: Ivan Mikhaylov <[email-masked]>
Date: Sun, 23 Jul 2023 22:20:30 +0300

Conversion from ftgmac100.txt to yaml format version.

Signed-off-by: Ivan Mikhaylov <[email-masked]>
---
 .../bindings/net/faraday,ftgmac100.yaml       | 103 ++++++++++++++++++
 .../devicetree/bindings/net/ftgmac100.txt     |  67 ------------
 2 files changed, 103 insertions(+), 67 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/ftgmac100.txt

diff --git a/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
new file mode 100644
index 000000000000..92686caf251f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTGMAC100 gigabit ethernet controller
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+maintainers:
+  - Po-Yu Chuang <[email-masked]>
+
+properties:
+  compatible:
+    oneOf:
+      - const: faraday,ftgmac100
+      - items:
+          - enum:
+              - aspeed,ast2400-mac
+              - aspeed,ast2500-mac
+              - aspeed,ast2600-mac
+          - const: faraday,ftgmac100
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: MAC IP clock
+      - description: RMII RCLK gate for AST2500/2600
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    contains:
+      enum:
+        - MACCLK
+        - RCLK
+
+  phy-mode:
+    enum:
+      - rgmii
+      - rmii
+
+  phy-handle: true
+
+  use-ncsi:
+    description:
+      Use the NC-SI stack instead of an MDIO PHY. Currently assumes
+      rmii (100bT) but kept as a separate property in case NC-SI grows support
+      for a gigabit link.
+    type: boolean
+
+  no-hw-checksum:
+    description:
+      Used to disable HW checksum support. Here for backward
+      compatibility as the driver now should have correct defaults based on
+      the SoC.
+    type: boolean
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mac0: ethernet@1e660000 {
+        compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+        reg = <0x1e660000 0x180>;
+        interrupts = <2>;
+        use-ncsi;
+    };
+
+    mac1: ethernet@1e680000 {
+        compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+        reg = <0x1e680000 0x180>;
+        interrupts = <2>;
+
+        phy-handle = <&phy>;
+        phy-mode = "rgmii";
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            phy: ethernet-phy@1 {
+                compatible = "ethernet-phy-ieee802.3-c22";
+                reg = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt
deleted file mode 100644
index 29234021f601..000000000000
--- a/Documentation/devicetree/bindings/net/ftgmac100.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-* Faraday Technology FTGMAC100 gigabit ethernet controller
-
-Required properties:
-- compatible: "faraday,ftgmac100"
-
-  Must also contain one of these if used as part of an Aspeed AST2400
-  or 2500 family SoC as they have some subtle tweaks to the
-  implementation:
-
-     - "aspeed,ast2400-mac"
-     - "aspeed,ast2500-mac"
-     - "aspeed,ast2600-mac"
-
-- reg: Address and length of the register set for the device
-- interrupts: Should contain ethernet controller interrupt
-
-Optional properties:
-- phy-handle: See ethernet.txt file in the same directory.
-- phy-mode: See ethernet.txt file in the same directory. If the property is
-  absent, "rgmii" is assumed. Supported values are "rgmii*" and "rmii" for
-  aspeed parts. Other (unknown) parts will accept any value.
-- use-ncsi: Use the NC-SI stack instead of an MDIO PHY. Currently assumes
-  rmii (100bT) but kept as a separate property in case NC-SI grows support
-  for a gigabit link.
-- no-hw-checksum: Used to disable HW checksum support. Here for backward
-  compatibility as the driver now should have correct defaults based on
-  the SoC.
-- clocks: In accordance with the generic clock bindings. Must describe the MAC
-  IP clock, and optionally an RMII RCLK gate for the AST2500/AST2600. The
-  required MAC clock must be the first cell.
-- clock-names:
-
-      - "MACCLK": The MAC IP clock
-      - "RCLK": Clock gate for the RMII RCLK
-
-Optional subnodes:
-- mdio: See mdio.txt file in the same directory.
-
-Example:
-
-	mac0: ethernet@1e660000 {
-		compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
-		reg = <0x1e660000 0x180>;
-		interrupts = <2>;
-		use-ncsi;
-	};
-
-Example with phy-handle:
-
-	mac1: ethernet@1e680000 {
-		compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
-		reg = <0x1e680000 0x180>;
-		interrupts = <2>;
-
-		phy-handle = <&phy>;
-		phy-mode = "rgmii";
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			phy: ethernet-phy@1 {
-				compatible = "ethernet-phy-ieee802.3-c22";
-				reg = <1>;
-			};
-		};
-	};
-- 
2.41.0