From: Hangbin Liu <liuhangbin@gmail•com>
To: netdev@vger•kernel.org
Cc: "David S. Miller" <davem@davemloft•net>,
"Jakub Kicinski" <kuba@kernel•org>,
"Eric Dumazet" <edumazet@google•com>,
"Paolo Abeni" <pabeni@redhat•com>,
"Shuah Khan" <shuah@kernel•org>,
"David Ahern" <dsahern@kernel•org>,
linux-kselftest@vger•kernel.org,
"Po-Hsu Lin" <po-hsu.lin@canonical•com>,
"Guillaume Nault" <gnault@redhat•com>,
"Björn Töpel" <bjorn@rivosinc•com>,
"Ryan Roberts" <ryan.roberts@arm•com>,
"Andrew Morton" <akpm@linux-foundation•org>,
"Mark Brown" <broonie@kernel•org>,
"Luis Chamberlain" <mcgrof@kernel•org>,
"Hangbin Liu" <liuhangbin@gmail•com>
Subject: [PATCH net-next 33/38] selftests/net: convert vrf_route_leaking.sh to run it in unique namespace
Date: Fri, 24 Nov 2023 17:27:31 +0800 [thread overview]
Message-ID: <20231124092736.3673263-34-liuhangbin@gmail.com> (raw)
In-Reply-To: <20231124092736.3673263-1-liuhangbin@gmail.com>
Here is the test result after conversion.
]# ./vrf_route_leaking.sh
###########################################################################
IPv4 (sym route): VRF ICMP ttl error route lookup ping
###########################################################################
TEST: Basic IPv4 connectivity [ OK ]
TEST: Ping received ICMP ttl exceeded [ OK ]
...
TEST: Basic IPv6 connectivity [ OK ]
TEST: Traceroute6 reports a hop on r1 [ OK ]
Tests passed: 18
Tests failed: 0
Signed-off-by: Hangbin Liu <liuhangbin@gmail•com>
---
.../selftests/net/vrf_route_leaking.sh | 201 +++++++++---------
1 file changed, 96 insertions(+), 105 deletions(-)
diff --git a/tools/testing/selftests/net/vrf_route_leaking.sh b/tools/testing/selftests/net/vrf_route_leaking.sh
index dedc52562b4f..2da32f4c479b 100755
--- a/tools/testing/selftests/net/vrf_route_leaking.sh
+++ b/tools/testing/selftests/net/vrf_route_leaking.sh
@@ -58,6 +58,7 @@
# to send an ICMP error back to the source when the ttl of a packet reaches 1
# while it is forwarded between different vrfs.
+source lib.sh
VERBOSE=0
PAUSE_ON_FAIL=no
DEFAULT_TTYPE=sym
@@ -171,11 +172,7 @@ run_cmd_grep()
cleanup()
{
- local ns
-
- for ns in h1 h2 r1 r2; do
- ip netns del $ns 2>/dev/null
- done
+ cleanup_ns $h1 $h2 $r1 $r2
}
setup_vrf()
@@ -212,72 +209,69 @@ setup_sym()
#
# create nodes as namespaces
- #
- for ns in h1 h2 r1; do
- ip netns add $ns
- ip -netns $ns link set lo up
-
- case "${ns}" in
- h[12]) ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0
- ip netns exec $ns sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1
- ;;
- r1) ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1
- ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1
- esac
+ setup_ns h1 h2 r1
+ for ns in $h1 $h2 $r1; do
+ if echo $ns | grep -q h[12]-; then
+ ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0
+ ip netns exec $ns sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1
+ else
+ ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1
+ ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1
+ fi
done
#
# create interconnects
#
- ip -netns h1 link add eth0 type veth peer name r1h1
- ip -netns h1 link set r1h1 netns r1 name eth0 up
+ ip -netns $h1 link add eth0 type veth peer name r1h1
+ ip -netns $h1 link set r1h1 netns $r1 name eth0 up
- ip -netns h2 link add eth0 type veth peer name r1h2
- ip -netns h2 link set r1h2 netns r1 name eth1 up
+ ip -netns $h2 link add eth0 type veth peer name r1h2
+ ip -netns $h2 link set r1h2 netns $r1 name eth1 up
#
# h1
#
- ip -netns h1 addr add dev eth0 ${H1_N1_IP}/24
- ip -netns h1 -6 addr add dev eth0 ${H1_N1_IP6}/64 nodad
- ip -netns h1 link set eth0 up
+ ip -netns $h1 addr add dev eth0 ${H1_N1_IP}/24
+ ip -netns $h1 -6 addr add dev eth0 ${H1_N1_IP6}/64 nodad
+ ip -netns $h1 link set eth0 up
# h1 to h2 via r1
- ip -netns h1 route add ${H2_N2} via ${R1_N1_IP} dev eth0
- ip -netns h1 -6 route add ${H2_N2_6} via "${R1_N1_IP6}" dev eth0
+ ip -netns $h1 route add ${H2_N2} via ${R1_N1_IP} dev eth0
+ ip -netns $h1 -6 route add ${H2_N2_6} via "${R1_N1_IP6}" dev eth0
#
# h2
#
- ip -netns h2 addr add dev eth0 ${H2_N2_IP}/24
- ip -netns h2 -6 addr add dev eth0 ${H2_N2_IP6}/64 nodad
- ip -netns h2 link set eth0 up
+ ip -netns $h2 addr add dev eth0 ${H2_N2_IP}/24
+ ip -netns $h2 -6 addr add dev eth0 ${H2_N2_IP6}/64 nodad
+ ip -netns $h2 link set eth0 up
# h2 to h1 via r1
- ip -netns h2 route add default via ${R1_N2_IP} dev eth0
- ip -netns h2 -6 route add default via ${R1_N2_IP6} dev eth0
+ ip -netns $h2 route add default via ${R1_N2_IP} dev eth0
+ ip -netns $h2 -6 route add default via ${R1_N2_IP6} dev eth0
#
# r1
#
- setup_vrf r1
- create_vrf r1 blue 1101
- create_vrf r1 red 1102
- ip -netns r1 link set mtu 1400 dev eth1
- ip -netns r1 link set eth0 vrf blue up
- ip -netns r1 link set eth1 vrf red up
- ip -netns r1 addr add dev eth0 ${R1_N1_IP}/24
- ip -netns r1 -6 addr add dev eth0 ${R1_N1_IP6}/64 nodad
- ip -netns r1 addr add dev eth1 ${R1_N2_IP}/24
- ip -netns r1 -6 addr add dev eth1 ${R1_N2_IP6}/64 nodad
+ setup_vrf $r1
+ create_vrf $r1 blue 1101
+ create_vrf $r1 red 1102
+ ip -netns $r1 link set mtu 1400 dev eth1
+ ip -netns $r1 link set eth0 vrf blue up
+ ip -netns $r1 link set eth1 vrf red up
+ ip -netns $r1 addr add dev eth0 ${R1_N1_IP}/24
+ ip -netns $r1 -6 addr add dev eth0 ${R1_N1_IP6}/64 nodad
+ ip -netns $r1 addr add dev eth1 ${R1_N2_IP}/24
+ ip -netns $r1 -6 addr add dev eth1 ${R1_N2_IP6}/64 nodad
# Route leak from blue to red
- ip -netns r1 route add vrf blue ${H2_N2} dev red
- ip -netns r1 -6 route add vrf blue ${H2_N2_6} dev red
+ ip -netns $r1 route add vrf blue ${H2_N2} dev red
+ ip -netns $r1 -6 route add vrf blue ${H2_N2_6} dev red
# Route leak from red to blue
- ip -netns r1 route add vrf red ${H1_N1} dev blue
- ip -netns r1 -6 route add vrf red ${H1_N1_6} dev blue
+ ip -netns $r1 route add vrf red ${H1_N1} dev blue
+ ip -netns $r1 -6 route add vrf red ${H1_N1_6} dev blue
# Wait for ip config to settle
@@ -293,90 +287,87 @@ setup_asym()
#
# create nodes as namespaces
- #
- for ns in h1 h2 r1 r2; do
- ip netns add $ns
- ip -netns $ns link set lo up
-
- case "${ns}" in
- h[12]) ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0
- ip netns exec $ns sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1
- ;;
- r[12]) ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1
- ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1
- esac
+ setup_ns h1 h2 r1 r2
+ for ns in $h1 $h2 $r1 $r2; do
+ if echo $ns | grep -q h[12]-; then
+ ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0
+ ip netns exec $ns sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1
+ else
+ ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1
+ ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1
+ fi
done
#
# create interconnects
#
- ip -netns h1 link add eth0 type veth peer name r1h1
- ip -netns h1 link set r1h1 netns r1 name eth0 up
+ ip -netns $h1 link add eth0 type veth peer name r1h1
+ ip -netns $h1 link set r1h1 netns $r1 name eth0 up
- ip -netns h1 link add eth1 type veth peer name r2h1
- ip -netns h1 link set r2h1 netns r2 name eth0 up
+ ip -netns $h1 link add eth1 type veth peer name r2h1
+ ip -netns $h1 link set r2h1 netns $r2 name eth0 up
- ip -netns h2 link add eth0 type veth peer name r1h2
- ip -netns h2 link set r1h2 netns r1 name eth1 up
+ ip -netns $h2 link add eth0 type veth peer name r1h2
+ ip -netns $h2 link set r1h2 netns $r1 name eth1 up
- ip -netns h2 link add eth1 type veth peer name r2h2
- ip -netns h2 link set r2h2 netns r2 name eth1 up
+ ip -netns $h2 link add eth1 type veth peer name r2h2
+ ip -netns $h2 link set r2h2 netns $r2 name eth1 up
#
# h1
#
- ip -netns h1 link add br0 type bridge
- ip -netns h1 link set br0 up
- ip -netns h1 addr add dev br0 ${H1_N1_IP}/24
- ip -netns h1 -6 addr add dev br0 ${H1_N1_IP6}/64 nodad
- ip -netns h1 link set eth0 master br0 up
- ip -netns h1 link set eth1 master br0 up
+ ip -netns $h1 link add br0 type bridge
+ ip -netns $h1 link set br0 up
+ ip -netns $h1 addr add dev br0 ${H1_N1_IP}/24
+ ip -netns $h1 -6 addr add dev br0 ${H1_N1_IP6}/64 nodad
+ ip -netns $h1 link set eth0 master br0 up
+ ip -netns $h1 link set eth1 master br0 up
# h1 to h2 via r1
- ip -netns h1 route add ${H2_N2} via ${R1_N1_IP} dev br0
- ip -netns h1 -6 route add ${H2_N2_6} via "${R1_N1_IP6}" dev br0
+ ip -netns $h1 route add ${H2_N2} via ${R1_N1_IP} dev br0
+ ip -netns $h1 -6 route add ${H2_N2_6} via "${R1_N1_IP6}" dev br0
#
# h2
#
- ip -netns h2 link add br0 type bridge
- ip -netns h2 link set br0 up
- ip -netns h2 addr add dev br0 ${H2_N2_IP}/24
- ip -netns h2 -6 addr add dev br0 ${H2_N2_IP6}/64 nodad
- ip -netns h2 link set eth0 master br0 up
- ip -netns h2 link set eth1 master br0 up
+ ip -netns $h2 link add br0 type bridge
+ ip -netns $h2 link set br0 up
+ ip -netns $h2 addr add dev br0 ${H2_N2_IP}/24
+ ip -netns $h2 -6 addr add dev br0 ${H2_N2_IP6}/64 nodad
+ ip -netns $h2 link set eth0 master br0 up
+ ip -netns $h2 link set eth1 master br0 up
# h2 to h1 via r2
- ip -netns h2 route add default via ${R2_N2_IP} dev br0
- ip -netns h2 -6 route add default via ${R2_N2_IP6} dev br0
+ ip -netns $h2 route add default via ${R2_N2_IP} dev br0
+ ip -netns $h2 -6 route add default via ${R2_N2_IP6} dev br0
#
# r1
#
- setup_vrf r1
- create_vrf r1 blue 1101
- create_vrf r1 red 1102
- ip -netns r1 link set mtu 1400 dev eth1
- ip -netns r1 link set eth0 vrf blue up
- ip -netns r1 link set eth1 vrf red up
- ip -netns r1 addr add dev eth0 ${R1_N1_IP}/24
- ip -netns r1 -6 addr add dev eth0 ${R1_N1_IP6}/64 nodad
- ip -netns r1 addr add dev eth1 ${R1_N2_IP}/24
- ip -netns r1 -6 addr add dev eth1 ${R1_N2_IP6}/64 nodad
+ setup_vrf $r1
+ create_vrf $r1 blue 1101
+ create_vrf $r1 red 1102
+ ip -netns $r1 link set mtu 1400 dev eth1
+ ip -netns $r1 link set eth0 vrf blue up
+ ip -netns $r1 link set eth1 vrf red up
+ ip -netns $r1 addr add dev eth0 ${R1_N1_IP}/24
+ ip -netns $r1 -6 addr add dev eth0 ${R1_N1_IP6}/64 nodad
+ ip -netns $r1 addr add dev eth1 ${R1_N2_IP}/24
+ ip -netns $r1 -6 addr add dev eth1 ${R1_N2_IP6}/64 nodad
# Route leak from blue to red
- ip -netns r1 route add vrf blue ${H2_N2} dev red
- ip -netns r1 -6 route add vrf blue ${H2_N2_6} dev red
+ ip -netns $r1 route add vrf blue ${H2_N2} dev red
+ ip -netns $r1 -6 route add vrf blue ${H2_N2_6} dev red
# No route leak from red to blue
#
# r2
#
- ip -netns r2 addr add dev eth0 ${R2_N1_IP}/24
- ip -netns r2 -6 addr add dev eth0 ${R2_N1_IP6}/64 nodad
- ip -netns r2 addr add dev eth1 ${R2_N2_IP}/24
- ip -netns r2 -6 addr add dev eth1 ${R2_N2_IP6}/64 nodad
+ ip -netns $r2 addr add dev eth0 ${R2_N1_IP}/24
+ ip -netns $r2 -6 addr add dev eth0 ${R2_N1_IP6}/64 nodad
+ ip -netns $r2 addr add dev eth1 ${R2_N2_IP}/24
+ ip -netns $r2 -6 addr add dev eth1 ${R2_N2_IP6}/64 nodad
# Wait for ip config to settle
sleep 2
@@ -384,14 +375,14 @@ setup_asym()
check_connectivity()
{
- ip netns exec h1 ping -c1 -w1 ${H2_N2_IP} >/dev/null 2>&1
+ ip netns exec $h1 ping -c1 -w1 ${H2_N2_IP} >/dev/null 2>&1
log_test $? 0 "Basic IPv4 connectivity"
return $?
}
check_connectivity6()
{
- ip netns exec h1 "${ping6}" -c1 -w1 ${H2_N2_IP6} >/dev/null 2>&1
+ ip netns exec $h1 "${ping6}" -c1 -w1 ${H2_N2_IP6} >/dev/null 2>&1
log_test $? 0 "Basic IPv6 connectivity"
return $?
}
@@ -426,7 +417,7 @@ ipv4_traceroute()
check_connectivity || return
- run_cmd_grep "${R1_N1_IP}" ip netns exec h1 traceroute ${H2_N2_IP}
+ run_cmd_grep "${R1_N1_IP}" ip netns exec $h1 traceroute ${H2_N2_IP}
log_test $? 0 "Traceroute reports a hop on r1"
}
@@ -449,7 +440,7 @@ ipv6_traceroute()
check_connectivity6 || return
- run_cmd_grep "${R1_N1_IP6}" ip netns exec h1 traceroute6 ${H2_N2_IP6}
+ run_cmd_grep "${R1_N1_IP6}" ip netns exec $h1 traceroute6 ${H2_N2_IP6}
log_test $? 0 "Traceroute6 reports a hop on r1"
}
@@ -470,7 +461,7 @@ ipv4_ping_ttl()
check_connectivity || return
- run_cmd_grep "Time to live exceeded" ip netns exec h1 ping -t1 -c1 -W2 ${H2_N2_IP}
+ run_cmd_grep "Time to live exceeded" ip netns exec $h1 ping -t1 -c1 -W2 ${H2_N2_IP}
log_test $? 0 "Ping received ICMP ttl exceeded"
}
@@ -491,7 +482,7 @@ ipv4_ping_frag()
check_connectivity || return
- run_cmd_grep "Frag needed" ip netns exec h1 ping -s 1450 -Mdo -c1 -W2 ${H2_N2_IP}
+ run_cmd_grep "Frag needed" ip netns exec $h1 ping -s 1450 -Mdo -c1 -W2 ${H2_N2_IP}
log_test $? 0 "Ping received ICMP Frag needed"
}
@@ -512,7 +503,7 @@ ipv6_ping_ttl()
check_connectivity6 || return
- run_cmd_grep "Time exceeded: Hop limit" ip netns exec h1 "${ping6}" -t1 -c1 -W2 ${H2_N2_IP6}
+ run_cmd_grep "Time exceeded: Hop limit" ip netns exec $h1 "${ping6}" -t1 -c1 -W2 ${H2_N2_IP6}
log_test $? 0 "Ping received ICMP Hop limit"
}
@@ -533,7 +524,7 @@ ipv6_ping_frag()
check_connectivity6 || return
- run_cmd_grep "Packet too big" ip netns exec h1 "${ping6}" -s 1450 -Mdo -c1 -W2 ${H2_N2_IP6}
+ run_cmd_grep "Packet too big" ip netns exec $h1 "${ping6}" -s 1450 -Mdo -c1 -W2 ${H2_N2_IP6}
log_test $? 0 "Ping received ICMP Packet too big"
}
--
2.41.0
next prev parent reply other threads:[~2023-11-24 9:30 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-24 9:26 [PATCH net-next 00/38] Conver all net selftests to run in unique namespace Hangbin Liu
2023-11-24 9:26 ` [PATCH net-next 01/38] selftests/net: add lib.sh Hangbin Liu
2023-11-24 14:05 ` Petr Machata
2023-11-25 5:41 ` Hangbin Liu
2023-11-27 13:15 ` Petr Machata
2023-11-24 14:35 ` Petr Machata
2023-11-24 15:25 ` Petr Machata
2023-11-25 6:15 ` Hangbin Liu
2023-11-27 13:19 ` Petr Machata
2023-11-24 9:27 ` [PATCH net-next 02/38] selftests/net: arp_ndisc_evict_nocarrier.sh convert to run test in unique namespace Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 03/38] selftest: arp_ndisc_untracked_subnets.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 04/38] selftests/net: convert cmsg tests to make them run " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 05/38] selftests/net: convert drop_monitor_tests.sh to run it " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 06/38] selftests/net: convert fcnal-test.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 07/38] selftests/net: convert fib_nexthop_multiprefix " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 08/38] selftests/net: convert fib_nexthop_nongw.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 09/38] selftests/net: convert fib_nexthops.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 10/38] selftests/net: convert fib-onlink-tests.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 11/38] selftests/net: convert fib_rule_tests.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 12/38] selftests/net: convert fib_tests.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 13/38] selftests/net: convert gre_gso.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 14/38] selftests/net: convert icmp_redirect.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 15/38] sleftests/net: convert icmp.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 16/38] selftests/net: convert ioam6.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 17/38] selftests/net: convert l2tp.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 18/38] selftests/net: convert ndisc_unsolicited_na_test.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 19/38] selftests/net: convert netns-name.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 20/38] selftests/net: convert fdb_flush.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 21/38] selftests/net: convert rtnetlink.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 22/38] selftests/net: convert sctp_vrf.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 23/38] selftests/net: use unique netns name for setup_loopback.sh setup_veth.sh Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 24/38] selftests/net: convert stress_reuseport_listen.sh to run it in unique namespace Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 25/38] selftests/net: convert test_bridge_backup_port.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 26/38] selftests/net: convert test_bridge_neigh_suppress.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 27/38] selftests/net: convert test_vxlan_mdb.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 28/38] selftests/net: convert test_vxlan_nolocalbypass.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 29/38] selftests/net: convert test_vxlan_under_vrf.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 30/38] selftests/net: convert test_vxlan_vnifiltering.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 31/38] selftests/net: convert toeplitz.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 32/38] selftests/net: convert unicast_extensions.sh " Hangbin Liu
2023-11-24 9:27 ` Hangbin Liu [this message]
2023-11-24 9:27 ` [PATCH net-next 34/38] selftests/net: convert vrf_strict_mode_test.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 35/38] selftests/net: convert vrf-xfrm-tests.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 36/38] selftests/net: convert traceroute.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 37/38] selftests/net: convert xfrm_policy.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 38/38] kselftest/runner.sh: add netns support Hangbin Liu
2023-11-27 2:42 ` [PATCH net-next 00/38] Conver all net selftests to run in unique namespace David Ahern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231124092736.3673263-34-liuhangbin@gmail.com \
--to=liuhangbin@gmail$(echo .)com \
--cc=akpm@linux-foundation$(echo .)org \
--cc=bjorn@rivosinc$(echo .)com \
--cc=broonie@kernel$(echo .)org \
--cc=davem@davemloft$(echo .)net \
--cc=dsahern@kernel$(echo .)org \
--cc=edumazet@google$(echo .)com \
--cc=gnault@redhat$(echo .)com \
--cc=kuba@kernel$(echo .)org \
--cc=linux-kselftest@vger$(echo .)kernel.org \
--cc=mcgrof@kernel$(echo .)org \
--cc=netdev@vger$(echo .)kernel.org \
--cc=pabeni@redhat$(echo .)com \
--cc=po-hsu.lin@canonical$(echo .)com \
--cc=ryan.roberts@arm$(echo .)com \
--cc=shuah@kernel$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox