From: "Marek Behún" <kabel@kernel•org>
To: netdev@vger•kernel.org, Andrew Lunn <andrew@lunn•ch>,
"David S. Miller" <davem@davemloft•net>,
Jakub Kicinski <kuba@kernel•org>, Paolo Abeni <pabeni@redhat•com>
Cc: "Russell King" <rmk+kernel@armlinux•org.uk>,
"Alexander Couzens" <lynxis@fe80•eu>,
"Daniel Golle" <daniel@makrotopia•org>,
"Heiner Kallweit" <hkallweit1@gmail•com>,
"Willy Liu" <willy.liu@realtek•com>,
"Ioana Ciornei" <ioana.ciornei@nxp•com>,
"Marek Mojík" <marek.mojik@nic•cz>,
"Maximilián Maliar" <maximilian.maliar@nic•cz>,
"Marek Behún" <kabel@kernel•org>
Subject: [PATCH net-next 06/15] net: phy: realtek: use generic MDIO constants
Date: Wed, 20 Dec 2023 16:55:09 +0100 [thread overview]
Message-ID: <20231220155518.15692-7-kabel@kernel.org> (raw)
In-Reply-To: <20231220155518.15692-1-kabel@kernel.org>
Drop the ad-hoc MDIO constants used in the driver and use generic
constants instead.
Signed-off-by: Marek Behún <kabel@kernel•org>
---
drivers/net/phy/realtek.c | 30 +++++++++++++-----------------
1 file changed, 13 insertions(+), 17 deletions(-)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 8f11320b38a8..52a7022d6a64 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -57,14 +57,6 @@
#define RTL8366RB_POWER_SAVE 0x15
#define RTL8366RB_POWER_SAVE_ON BIT(12)
-#define RTL_SUPPORTS_5000FULL BIT(14)
-#define RTL_SUPPORTS_2500FULL BIT(13)
-#define RTL_SUPPORTS_10000FULL BIT(0)
-#define RTL_ADV_2500FULL BIT(7)
-#define RTL_LPADV_10000FULL BIT(11)
-#define RTL_LPADV_5000FULL BIT(6)
-#define RTL_LPADV_2500FULL BIT(5)
-
#define RTL9000A_GINMR 0x14
#define RTL9000A_GINMR_LINK_STATUS BIT(4)
@@ -653,11 +645,11 @@ static int rtl822x_get_features(struct phy_device *phydev)
return val;
linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
- phydev->supported, val & RTL_SUPPORTS_2500FULL);
+ phydev->supported, val & MDIO_PMA_SPEED_2_5G);
linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
- phydev->supported, val & RTL_SUPPORTS_5000FULL);
+ phydev->supported, val & MDIO_PMA_SPEED_5G);
linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
- phydev->supported, val & RTL_SUPPORTS_10000FULL);
+ phydev->supported, val & MDIO_SPEED_10G);
return genphy_read_abilities(phydev);
}
@@ -671,10 +663,11 @@ static int rtl822x_config_aneg(struct phy_device *phydev)
if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
phydev->advertising))
- adv2500 = RTL_ADV_2500FULL;
+ adv2500 = MDIO_AN_10GBT_CTRL_ADV2_5G;
ret = phy_modify_paged_changed(phydev, 0xa5d, 0x12,
- RTL_ADV_2500FULL, adv2500);
+ MDIO_AN_10GBT_CTRL_ADV2_5G,
+ adv2500);
if (ret < 0)
return ret;
}
@@ -693,11 +686,14 @@ static int rtl822x_read_status(struct phy_device *phydev)
return lpadv;
linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
- phydev->lp_advertising, lpadv & RTL_LPADV_10000FULL);
+ phydev->lp_advertising,
+ lpadv & MDIO_AN_10GBT_STAT_LP10G);
linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
- phydev->lp_advertising, lpadv & RTL_LPADV_5000FULL);
+ phydev->lp_advertising,
+ lpadv & MDIO_AN_10GBT_STAT_LP5G);
linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
- phydev->lp_advertising, lpadv & RTL_LPADV_2500FULL);
+ phydev->lp_advertising,
+ lpadv & MDIO_AN_10GBT_STAT_LP2_5G);
}
ret = genphy_read_status(phydev);
@@ -715,7 +711,7 @@ static bool rtlgen_supports_2_5gbps(struct phy_device *phydev)
val = phy_read(phydev, 0x13);
phy_write(phydev, RTL821x_PAGE_SELECT, 0);
- return val >= 0 && val & RTL_SUPPORTS_2500FULL;
+ return val >= 0 && val & MDIO_PMA_SPEED_2_5G;
}
static int rtlgen_match_phy_device(struct phy_device *phydev)
--
2.41.0
next prev parent reply other threads:[~2023-12-20 15:55 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-20 15:55 [PATCH net-next 00/15] Realtek RTL822x PHY rework to c45 and SerDes interface switching Marek Behún
2023-12-20 15:55 ` [PATCH net-next 01/15] net: phy: fail early with error code if indirect MMD access fails Marek Behún
2024-01-02 11:09 ` Russell King (Oracle)
2023-12-20 15:55 ` [PATCH net-next 02/15] net: phy: export indirect MMD register accessors Marek Behún
2024-01-02 11:15 ` Russell King (Oracle)
2023-12-20 15:55 ` [PATCH net-next 03/15] net: phy: realtek: rework MMD register access methods Marek Behún
2024-01-02 11:16 ` Russell King (Oracle)
2024-01-02 13:18 ` Heiner Kallweit
2023-12-20 15:55 ` [PATCH net-next 04/15] net: phy: realtek: fill .read_mmd and .write_mmd methods for all rtl822x PHYs Marek Behún
2024-01-02 11:16 ` Russell King (Oracle)
2023-12-20 15:55 ` [PATCH net-next 05/15] net: mdio: add 2.5g and 5g related PMA speed constants Marek Behún
2024-01-02 11:05 ` Russell King (Oracle)
2023-12-20 15:55 ` Marek Behún [this message]
2024-01-02 11:06 ` [PATCH net-next 06/15] net: phy: realtek: use generic MDIO constants Russell King (Oracle)
2023-12-20 15:55 ` [PATCH net-next 07/15] net: phy: realtek: set is_c45 and fill in c45 IDs in PHY probe for rtl822x PHYs Marek Behún
2023-12-20 15:55 ` [PATCH net-next 08/15] net: phy: realtek: use generic clause 45 feature reading " Marek Behún
2023-12-20 15:55 ` [PATCH net-next 09/15] net: phy: realtek: read standard MMD register for rtlgen speed capability Marek Behún
2023-12-20 15:55 ` [PATCH net-next 10/15] net: phy: realtek: use generic c45 AN config with 1000baseT vendor extension for rtl822x Marek Behún
2023-12-20 15:55 ` [PATCH net-next 11/15] net: phy: realtek: use generic c45 status reading " Marek Behún
2023-12-20 15:55 ` [PATCH net-next 12/15] net: phy: realtek: use generic c45 suspend/resume " Marek Behún
2023-12-20 15:55 ` [PATCH net-next 13/15] net: phy: realtek: drop .read_page and .write_page for rtl822x series Marek Behún
2023-12-20 17:23 ` Heiner Kallweit
2023-12-21 10:21 ` Marek Behún
2023-12-20 15:55 ` [PATCH net-next 14/15] net: phy: realtek: configure SerDes mode for rtl822x PHYs Marek Behún
2023-12-20 15:55 ` [PATCH net-next 15/15] net: sfp: add quirk for another multigig RollBall transceiver Marek Behún
2023-12-20 16:20 ` [PATCH net-next 00/15] Realtek RTL822x PHY rework to c45 and SerDes interface switching Heiner Kallweit
2023-12-20 16:25 ` Marek Behún
2023-12-20 17:07 ` Heiner Kallweit
2023-12-23 19:09 ` Heiner Kallweit
2023-12-25 10:28 ` Marek Behún
2023-12-26 12:46 ` Heiner Kallweit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231220155518.15692-7-kabel@kernel.org \
--to=kabel@kernel$(echo .)org \
--cc=andrew@lunn$(echo .)ch \
--cc=daniel@makrotopia$(echo .)org \
--cc=davem@davemloft$(echo .)net \
--cc=hkallweit1@gmail$(echo .)com \
--cc=ioana.ciornei@nxp$(echo .)com \
--cc=kuba@kernel$(echo .)org \
--cc=lynxis@fe80$(echo .)eu \
--cc=marek.mojik@nic$(echo .)cz \
--cc=maximilian.maliar@nic$(echo .)cz \
--cc=netdev@vger$(echo .)kernel.org \
--cc=pabeni@redhat$(echo .)com \
--cc=rmk+kernel@armlinux$(echo .)org.uk \
--cc=willy.liu@realtek$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox