Subject: Re: [PATCH v4 net-next 0/5] net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2220 PHY

From: Dimitri Fedrau <[email-masked]>
Date: Mon, 8 Jan 2024 12:24:18 +0100

Am Mon, Jan 08, 2024 at 12:18:30PM +0100 schrieb Heiner Kallweit:
> On 08.01.2024 10:36, Dimitri Fedrau wrote:
> > Changes in v2:
> > 	- used defines MDIO_CTRL1_LPOWER and MDIO_PMA_CTRL1_SPEED1000
> > 	  in mv88q222x_config_aneg_preinit
> > 	- use genphy_c45_loopback
> > 	- mv88q2xxx_read_status reads speed, master or slave state when
> > 	  autonegotiation is enabled
> > 	- added defines for magic values in mv88q222x_get_sqi
> > 
> > Changes in v3:
> > 	- mv88q2xxx_read_status includes autonegotiation case
> > 	- add support for 100BT1 and 1000BT1 linkmode advertisement
> > 	- use mv88q2xxx_get_sqi and mv88q2xxx_get_sqi_max, remove
> > 	  mv88q222x_get_sqi and mv88q222x_get_sqi_max
> > 	- fix typo: rename mv88q2xxxx_get_sqi and mv88q2xxxx_get_sqi_max to
> > 	  mv88q2xxx_get_sqi and mv88q2xxx_get_sqi
> > 	- add define MDIO_MMD_PCS_MV_RX_STAT for magic value 0x8230, documented
> > 	  in latest datasheets for both PHYs
> > 
> > Changes in V4:
> > 	- clean up init sequence
> > 	- separate patch for fixing typos in upstreamed code
> > 
> > Dimitri Fedrau (5):
> >   net: phy: Add BaseT1 auto-negotiation constants
> >   net: phy: Support 100/1000BT1 linkmode advertisements
> >   net: phy: c45: detect 100/1000BASE-T1 linkmode advertisements
> >   net: phy: marvell-88q2xxx: fix typos
> >   net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2220 PHY
> > 
> >  drivers/net/phy/marvell-88q2xxx.c | 234 +++++++++++++++++++++++++++---
> >  drivers/net/phy/phy-c45.c         |   3 +-
> >  include/linux/marvell_phy.h       |   1 +
> >  include/linux/mdio.h              |   8 +
> >  include/uapi/linux/mdio.h         |   2 +
> >  5 files changed, 230 insertions(+), 18 deletions(-)
> > 
> net-next is closed. Let's see whether the maintainers still accept your series.
> Otherwise you may have to resubmit once net-next opens again.
>
Hi Heiner,

thanks for the information, next time I will check if net-next is
closed.

Best regards,
Dimitri Fedrau