Subject: Re: [PATCH v2 1/6] net: hisilicon: add support for hisi_femac core on Hi3798MV200

From: Simon Horman <[email-masked]>
Date: Mon, 19 Feb 2024 15:53:46 +0000

On Fri, Feb 16, 2024 at 06:02:00PM +0800, Yang Xiwen via B4 Relay wrote:

...

> @@ -826,15 +847,32 @@ static int hisi_femac_drv_probe(struct platform_device *pdev)
>  						 priv->phy_reset_delays,
>  						 DELAYS_NUM);
>  		if (ret)
> -			goto out_disable_clk;
> +			goto out_free_netdev;
>  		hisi_femac_phy_reset(priv);
>  	}
>  
> +	// Register the optional MDIO bus
> +	for_each_available_child_of_node(node, mdio_np) {
> +		if (of_node_name_prefix(mdio_np, "mdio")) {
> +			priv->mdio_pdev = of_platform_device_create(mdio_np, NULL, dev);
> +			of_node_put(mdio_np);
> +			if (!priv->mdio_pdev) {
> +				dev_err(dev, "failed to register MDIO bus device\n");
> +				goto out_free_netdev;

Hi Yang Xiwen,

out_free_netdev will return ret.
However, it seems that ret is uninitialised here.
Perhaps it should be set to a negative error value?

Flagged by Smatch.

> +			}
> +			mdio_registered = true;
> +			break;
> +		}
> +	}
> +
> +	if (!mdio_registered)
> +		dev_warn(dev, "MDIO subnode notfound. This is usually a bug.\n");
> +
>  	phy = of_phy_get_and_connect(ndev, node, hisi_femac_adjust_link);
>  	if (!phy) {
>  		dev_err(dev, "connect to PHY failed!\n");
>  		ret = -ENODEV;
> -		goto out_disable_clk;
> +		goto out_unregister_mdio_bus;
>  	}
>  
>  	phy_attached_print(phy, "phy_id=0x%.8lx, phy_mode=%s\n",

...