Subject: Re: [PATCH v6 RESEND net-next 1/5] net: enetc: add Rx checksum offload for i.MX95 ENETC

From: Simon Horman <[email-masked]>
Date: Fri, 6 Dec 2024 12:30:30 +0000

On Fri, Dec 06, 2024 at 10:33:15AM +0000, Wei Fang wrote:
> > -----Original Message-----
> > From: Simon Horman <[email-masked]>
> > Sent: 2024年12月6日 17:23
> > To: Wei Fang <[email-masked]>
> > Cc: Claudiu Manoil <[email-masked]>; Vladimir Oltean
> > <[email-masked]>; Clark Wang <[email-masked]>;
> > [email-masked]; [email-masked]; [email-masked];
> > [email-masked]; [email-masked]; Frank Li <[email-masked]>;
> > [email-masked]; [email-masked]; [email-masked]
> > Subject: Re: [PATCH v6 RESEND net-next 1/5] net: enetc: add Rx checksum
> > offload for i.MX95 ENETC
> > 
> > On Wed, Dec 04, 2024 at 01:29:28PM +0800, Wei Fang wrote:
> > > ENETC rev 4.1 supports TCP and UDP checksum offload for receive, the bit
> > > 108 of the Rx BD will be set if the TCP/UDP checksum is correct. Since
> > > this capability is not defined in register, the rx_csum bit is added to
> > > struct enetc_drvdata to indicate whether the device supports Rx checksum
> > > offload.
> > >
> > > Signed-off-by: Wei Fang <[email-masked]>
> > > Reviewed-by: Frank Li <[email-masked]>
> > > Reviewed-by: Claudiu Manoil <[email-masked]>
> > > ---
> > > v2: no changes
> > > v3: no changes
> > > v4: no changes
> > > v5: no changes
> > > v6: no changes
> > > ---
> > >  drivers/net/ethernet/freescale/enetc/enetc.c       | 14 ++++++++++----
> > >  drivers/net/ethernet/freescale/enetc/enetc.h       |  2 ++
> > >  drivers/net/ethernet/freescale/enetc/enetc_hw.h    |  2 ++
> > >  .../net/ethernet/freescale/enetc/enetc_pf_common.c |  3 +++
> > >  4 files changed, 17 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c
> > b/drivers/net/ethernet/freescale/enetc/enetc.c
> > > index 35634c516e26..3137b6ee62d3 100644
> > > --- a/drivers/net/ethernet/freescale/enetc/enetc.c
> > > +++ b/drivers/net/ethernet/freescale/enetc/enetc.c
> > > @@ -1011,10 +1011,15 @@ static void enetc_get_offloads(struct enetc_bdr
> > *rx_ring,
> > >
> > >  	/* TODO: hashing */
> > >  	if (rx_ring->ndev->features & NETIF_F_RXCSUM) {
> > > -		u16 inet_csum = le16_to_cpu(rxbd->r.inet_csum);
> > > -
> > > -		skb->csum = csum_unfold((__force __sum16)~htons(inet_csum));
> > > -		skb->ip_summed = CHECKSUM_COMPLETE;
> > > +		if (priv->active_offloads & ENETC_F_RXCSUM &&
> > > +		    le16_to_cpu(rxbd->r.flags) & ENETC_RXBD_FLAG_L4_CSUM_OK)
> > {
> > > +			skb->ip_summed = CHECKSUM_UNNECESSARY;
> > > +		} else {
> > > +			u16 inet_csum = le16_to_cpu(rxbd->r.inet_csum);
> > > +
> > > +			skb->csum = csum_unfold((__force __sum16)~htons(inet_csum));
> > > +			skb->ip_summed = CHECKSUM_COMPLETE;
> > > +		}
> > >  	}
> > 
> > Hi Wei,
> > 
> > I am wondering about the relationship between the above and
> > hardware support for CHECKSUM_COMPLETE.
> > 
> > Prior to this patch CHECKSUM_COMPLETE was always used, which seems
> > desirable. But with this patch, CHECKSUM_UNNECESSARY is conditionally used.
> > 
> > If those cases don't work with CHECKSUM_COMPLETE then is this a bug-fix?
> > 
> > Or, alternatively, if those cases do work with CHECKSUM_COMPLETE, then
> > I'm unsure why this change is necessary or desirable. It's my understanding
> > that from the Kernel's perspective CHECKSUM_COMPLETE is preferable to
> > CHECKSUM_UNNECESSARY.
> > 
> > ...
> 
> Rx checksum offload is a new feature of ENETC v4. We would like to exploit this
> capability of the hardware to save CPU cycles in calculating and verifying checksum.
> 

Understood, but CHECKSUM_UNNECESSARY is usually the preferred option as it
is more flexible, e.g. allowing low-cost calculation of inner checksums
in the presence of encapsulation.