Subject: Re: [PATCH net-next v3 1/3] dt-bindings: net: ethernet-phy: add property tx-amplitude-100base-tx-percent

From: Dimitri Fedrau <[email-masked]>
Date: Wed, 5 Feb 2025 05:51:52 +0100

Am Tue, Feb 04, 2025 at 09:34:09AM -0600 schrieb Rob Herring:
> On Tue, Feb 04, 2025 at 02:09:15PM +0100, Dimitri Fedrau wrote:
> > Add property tx-amplitude-100base-tx-percent in the device tree bindings
> > for configuring the tx amplitude of 100BASE-TX PHYs. Modifying it can be
> > necessary to compensate losses on the PCB and connector, so the voltages
> > measured on the RJ45 pins are conforming.
> > 
> > Signed-off-by: Dimitri Fedrau <[email-masked]>
> > ---
> >  Documentation/devicetree/bindings/net/ethernet-phy.yaml | 7 +++++++
> >  1 file changed, 7 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> > index 2c71454ae8e362e7032e44712949e12da6826070..04f42961035f273990fdf4368ad1352397fc3774 100644
> > --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> > +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> > @@ -232,6 +232,13 @@ properties:
> >        PHY's that have configurable TX internal delays. If this property is
> >        present then the PHY applies the TX delay.
> >  
> > +  tx-amplitude-100base-tx-percent:
> > +    description: |
> 
> Don't need '|' if no formatting to preserve.
>
Wasn't sure about the '|', because some properties use
it(rx-internal-delay-ps or tx-internal-delay-ps) others not. Is it wrong
there ? I don't see any reason to preserve formatting there. Anyway will remove
the '|' as you proposed. Thanks for explaining, didn't know.

Best regards,
Dimitri Fedrau

[...]