From: Jakub Kicinski <kuba@kernel•org>
To: davem@davemloft•net
Cc: netdev@vger•kernel.org, edumazet@google•com, pabeni@redhat•com,
andrew+netdev@lunn•ch, horms@kernel•org, donald.hunter@gmail•com,
shuah@kernel•org, kory.maincent@bootlin•com,
maxime.chevallier@bootlin•com, sdf@fomichev•me,
ecree.xilinx@gmail•com, gal@nvidia•com, jdamato@fastly•com,
andrew@lunn•ch, Jakub Kicinski <kuba@kernel•org>
Subject: [PATCH net-next v3 08/11] netlink: specs: define input-xfrm enum in the spec
Date: Tue, 15 Jul 2025 17:03:28 -0700 [thread overview]
Message-ID: <20250716000331.1378807-9-kuba@kernel.org> (raw)
In-Reply-To: <20250716000331.1378807-1-kuba@kernel.org>
Help YNL decode the values for input-xfrm by defining
the possible values in the spec. Don't define "no change"
as it's an IOCTL artifact with no use in Netlink.
With this change on mlx5 input-xfrm gets decoded:
# ynl --family ethtool --dump rss-get
[{'header': {'dev-index': 2, 'dev-name': 'eth0'},
'hfunc': 1,
'hkey': b'V\xa8\xf9\x9 ...',
'indir': [0, 1, ... ],
'input-xfrm': {'sym-or-xor'}, <<<
'flow-hash': {'ah4': {'ip-dst', 'ip-src'},
'ah6': {'ip-dst', 'ip-src'},
'esp4': {'ip-dst', 'ip-src'},
'esp6': {'ip-dst', 'ip-src'},
'ip4': {'ip-dst', 'ip-src'},
'ip6': {'ip-dst', 'ip-src'},
'tcp4': {'l4-b-0-1', 'ip-dst', 'l4-b-2-3', 'ip-src'},
'tcp6': {'l4-b-0-1', 'ip-dst', 'l4-b-2-3', 'ip-src'},
'udp4': {'l4-b-0-1', 'ip-dst', 'l4-b-2-3', 'ip-src'},
'udp6': {'l4-b-0-1', 'ip-dst', 'l4-b-2-3', 'ip-src'}}
}]
Signed-off-by: Jakub Kicinski <kuba@kernel•org>
---
v3:
- make input xfrm a flags field
v2:
- adjust the test to decoded values
---
Documentation/netlink/specs/ethtool.yaml | 21 +++++++++++++++++++
| 6 +++---
2 files changed, 24 insertions(+), 3 deletions(-)
diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml
index aa55fc9068e1..d0a9c4120a19 100644
--- a/Documentation/netlink/specs/ethtool.yaml
+++ b/Documentation/netlink/specs/ethtool.yaml
@@ -158,6 +158,26 @@ c-version-name: ethtool-genl-version
-
name: pse-event-sw-pw-control-error
doc: PSE faced an error managing the power control from software
+ -
+ name: input-xfrm
+ doc: RSS hash function transformations.
+ type: flags
+ enum-name:
+ name-prefix: rxh-xfrm-
+ header: linux/ethtool.h
+ entries:
+ -
+ name: sym-xor
+ doc: >-
+ XOR the corresponding source and destination fields of each specified
+ protocol. Both copies of the XOR'ed fields are fed into the RSS and
+ RXHASH calculation. Note that this XORing reduces the input set
+ entropy and could be exploited to reduce the RSS queue spread.
+ -
+ name: sym-or-xor
+ doc: >-
+ Similar to SYM_XOR, except that one copy of the XOR'ed fields is
+ replaced by an OR of the same fields.
-
name: rxfh-fields
name-prefix: rxh-
@@ -1621,6 +1641,7 @@ c-version-name: ethtool-genl-version
-
name: input-xfrm
type: u32
+ enum: input-xfrm
-
name: start-context
type: u32
--git a/tools/testing/selftests/drivers/net/hw/rss_input_xfrm.py b/tools/testing/selftests/drivers/net/hw/rss_input_xfrm.py
index 648ff50bc1c3..6e90fb290564 100755
--- a/tools/testing/selftests/drivers/net/hw/rss_input_xfrm.py
+++ b/tools/testing/selftests/drivers/net/hw/rss_input_xfrm.py
@@ -37,11 +37,11 @@ from lib.py import rand_port
if not hasattr(socket, "SO_INCOMING_CPU"):
raise KsftSkipEx("socket.SO_INCOMING_CPU was added in Python 3.11")
- input_xfrm = cfg.ethnl.rss_get(
- {'header': {'dev-name': cfg.ifname}}).get('input-xfrm')
+ rss = cfg.ethnl.rss_get({'header': {'dev-name': cfg.ifname}})
+ input_xfrm = set(filter(lambda x: 'sym' in x, rss.get('input-xfrm', {})))
# Check for symmetric xor/or-xor
- if not input_xfrm or (input_xfrm != 1 and input_xfrm != 2):
+ if not input_xfrm:
raise KsftSkipEx("Symmetric RSS hash not requested")
cpus = set()
--
2.50.1
next prev parent reply other threads:[~2025-07-16 0:04 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-16 0:03 [PATCH net-next v3 00/11] ethtool: rss: support RSS_SET via Netlink Jakub Kicinski
2025-07-16 0:03 ` [PATCH net-next v3 01/11] ethtool: rss: initial RSS_SET (indirection table handling) Jakub Kicinski
2025-07-16 7:30 ` Gal Pressman
2025-07-16 0:03 ` [PATCH net-next v3 02/11] selftests: drv-net: rss_api: factor out checking min queue count Jakub Kicinski
2025-07-16 0:03 ` [PATCH net-next v3 03/11] tools: ynl: support packing binary arrays of scalars Jakub Kicinski
2025-07-16 0:03 ` [PATCH net-next v3 04/11] selftests: drv-net: rss_api: test setting indirection table via Netlink Jakub Kicinski
2025-07-16 0:03 ` [PATCH net-next v3 05/11] ethtool: rss: support setting hfunc " Jakub Kicinski
2025-07-16 0:03 ` [PATCH net-next v3 06/11] ethtool: rss: support setting hkey " Jakub Kicinski
2025-07-16 0:03 ` [PATCH net-next v3 07/11] selftests: drv-net: rss_api: test setting hashing key " Jakub Kicinski
2025-07-16 0:03 ` Jakub Kicinski [this message]
2025-07-16 7:43 ` [PATCH net-next v3 08/11] netlink: specs: define input-xfrm enum in the spec Gal Pressman
2025-07-16 0:03 ` [PATCH net-next v3 09/11] ethtool: rss: support setting input-xfrm via Netlink Jakub Kicinski
2025-07-16 0:03 ` [PATCH net-next v3 10/11] ethtool: rss: support setting flow hashing fields Jakub Kicinski
2025-07-16 7:28 ` Gal Pressman
2025-07-16 0:03 ` [PATCH net-next v3 11/11] selftests: drv-net: rss_api: test input-xfrm and hash fields Jakub Kicinski
2025-07-17 23:30 ` [PATCH net-next v3 00/11] ethtool: rss: support RSS_SET via Netlink patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250716000331.1378807-9-kuba@kernel.org \
--to=kuba@kernel$(echo .)org \
--cc=andrew+netdev@lunn$(echo .)ch \
--cc=andrew@lunn$(echo .)ch \
--cc=davem@davemloft$(echo .)net \
--cc=donald.hunter@gmail$(echo .)com \
--cc=ecree.xilinx@gmail$(echo .)com \
--cc=edumazet@google$(echo .)com \
--cc=gal@nvidia$(echo .)com \
--cc=horms@kernel$(echo .)org \
--cc=jdamato@fastly$(echo .)com \
--cc=kory.maincent@bootlin$(echo .)com \
--cc=maxime.chevallier@bootlin$(echo .)com \
--cc=netdev@vger$(echo .)kernel.org \
--cc=pabeni@redhat$(echo .)com \
--cc=sdf@fomichev$(echo .)me \
--cc=shuah@kernel$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox