Subject: [PATCH net v3 1/1] net: phy: bcm54811: Fix GMII/MII/MII-Lite selection

From: Kamil Horák - 2N <[email-masked]>
Date: Thu, 9 Oct 2025 15:06:56 +0200

The Broadcom bcm54811 is hardware-strapped to select among RGMII and
GMII/MII/MII-Lite modes. However, the corresponding bit, RGMII Enable
in Miscellaneous Control Register must be also set to select desired
RGMII or MII(-lite)/GMII mode.

Fixes: 3117a11fff5af9e7 ("net: phy: bcm54811: PHY initialization")
Signed-off-by: Kamil Horák - 2N <[email-masked]>
---
 drivers/net/phy/broadcom.c | 20 +++++++++++++++++++-
 include/linux/brcmphy.h    |  1 +
 2 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 3459a0e9d8b9..cb306f9e80cc 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -405,7 +405,7 @@ static int bcm5481x_set_brrmode(struct phy_device *phydev, bool on)
 static int bcm54811_config_init(struct phy_device *phydev)
 {
 	struct bcm54xx_phy_priv *priv = phydev->priv;
-	int err, reg, exp_sync_ethernet;
+	int err, reg, exp_sync_ethernet, aux_rgmii_en;
 
 	/* Enable CLK125 MUX on LED4 if ref clock is enabled. */
 	if (!(phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)) {
@@ -434,6 +434,24 @@ static int bcm54811_config_init(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
+	/* Enable RGMII if configured */
+	if (phy_interface_is_rgmii(phydev))
+		aux_rgmii_en = MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_EN |
+			       MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
+	else
+		aux_rgmii_en = 0;
+
+	/* Also writing Reserved bits 6:5 because the documentation requires
+	 * them to be written to 0b11
+	 */
+	err = bcm54xx_auxctl_write(phydev,
+				   MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
+				   MII_BCM54XX_AUXCTL_MISC_WREN |
+				   aux_rgmii_en |
+				   MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RSVD);
+	if (err < 0)
+		return err;
+
 	return bcm5481x_set_brrmode(phydev, priv->brr_mode);
 }
 
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 15c35655f482..115a964f3006 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -137,6 +137,7 @@
 
 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC			0x07
 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN	0x0010
+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RSVD		0x0060
 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_EN	0x0080
 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN	0x0100
 #define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX		0x0200
-- 
2.39.5