Subject: Re: [GIT PULL] bluetooth-next 2026-04-10

From: Jakub Kicinski <[email-masked]>
Date: Sun, 12 Apr 2026 09:16:14 -0700

On Fri, 10 Apr 2026 13:22:06 -0400 Luiz Augusto von Dentz wrote:
> bluetooth-next pull request for net-next:
> 
> core:
>  - hci_core: Rate limit the logging of invalid ISO handle
>  - hci_sync: make hci_cmd_sync_run_once return -EEXIST if exists
>  - hci_event: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
>  - hci_event: fix potential UAF in SSP passkey handlers
>  - HCI: Avoid a couple -Wflex-array-member-not-at-end warnings
>  - L2CAP: CoC: Disconnect if received packet size exceeds MPS
>  - L2CAP: Add missing chan lock in l2cap_ecred_reconf_rsp
>  - L2CAP: Fix printing wrong information if SDU length exceeds MTU
>  - SCO: check for codecs->num_codecs == 1 before assigning to sco_pi(sk)->codec
> 
> drivers:
>  - btusb: MT7922: Add VID/PID 0489/e174
>  - btusb: Add Lite-On 04ca:3807 for MediaTek MT7921
>  - btusb: Add MT7927 IDs ASUS ROG Crosshair X870E Hero, Lenovo Legion Pro 7
> 	  16ARX9, Gigabyte Z790 AORUS MASTER X, MSI X870E Ace Max, TP-Link
> 	  Archer TBE550E, ASUS X870E / ProArt X870E-Creator.
>  - btusb: Add MT7902 IDs 13d3/3579, 13d3/3580, 13d3/3594, 13d3/3596, 0e8d/1ede
>  - btusb: MediaTek MT7922: Add VID 0489 & PID e11d
>  - btintel: Add support for Scorpious Peak2 support
>  - btintel: Add support for Scorpious Peak2F support
>  - btintel_pcie: Add device id of Scorpius Peak2, Nova Lake-PCD-H
>  - btintel_pcie: Add device id of Scorpious2, Nova Lake-PCD-S
>  - btmtk: Add reset mechanism if downloading firmware failed
>  - btmtk: Add MT6639 (MT7927) Bluetooth support
>  - btmtk: fix ISO interface setup for single alt setting
>  - btmtk: add MT7902 SDIO support
>  - Bluetooth: btmtk: add MT7902 MCU support
>  - btbcm: Add entry for BCM4343A2 UART Bluetooth
>  - qca: enable pwrseq support for wcn39xx devices
>  - hci_qca: Fix BT not getting powered-off on rmmod
>  - hci_qca: disable power control for WCN7850 when bt_en is not defined
>  - hci_qca: Fix missing wakeup during SSR memdump handling
>  - hci_ldisc: Clear HCI_UART_PROTO_INIT on error
>  - mmc: sdio: add MediaTek MT7902 SDIO device ID
>  - hci_ll: Enable BROKEN_ENHANCED_SETUP_SYNC_CONN for WL183x

Two fixes tags are messed up here:

Commit: 802446198014 ("Bluetooth: btmtk: hide unused btmtk_mt6639_devs[] array")
	Fixes tag: Fixes: 4cdd001ff03f ("Bluetooth: btmtk: Add MT6639 (MT7927) Bluetooth support")
	Has these problem(s):
		- Target SHA1 does not exist

Commit: 28c9cc700e30 ("Bluetooth: L2CAP: Fix printing wrong information if SDU length exceeds MTU")
	Fixes tag: Fixes: fa768fce4aae ("Bluetooth: LE L2CAP: Disconnect if received packet's SDU exceeds IMTU")
	Has these problem(s):
		- Target SHA1 does not exist