Subject: Re: [GIT PULL] wireless-2026-04-30

From: Jakub Kicinski <[email-masked]>
Date: Thu, 30 Apr 2026 07:12:39 -0700

On Thu, 30 Apr 2026 13:17:52 +0200 Johannes Berg wrote:
> So the LLM floodgates are starting to open ;-) But I'm somewhat
> happy that so far we haven't gotten any really critical reports.
> Here's a couple of first fixes though.
> 
> Please pull and let us know if there's any problem.

Looks like this breaks kunit:

ok 70 mac80211-tpe
    KTAP version 1
    # Subtest: mac80211-mlme-chan-mode
    # module: mac80211_tests
    1..1
        KTAP version 1
        # Subtest: test_determine_chan_mode
        ok 1 Normal case, EHT is working
        ok 2 Requiring EHT support is fine
        ok 3 Lowering the mode limits us
kunit: required basic rate or BSS membership selectors not supported or disabled, rejecting connection
        ok 4 Requesting a basic rate/selector that we do not support
        ok 5 As before, but userspace says it is taking care of it
    # test_determine_chan_mode: ASSERTION FAILED at net/mac80211/tests/chan-mode.c:258
    Expected conn.mode == params->expected_mode, but
        conn.mode == 5 (0x5)
        params->expected_mode == 1 (0x1)
        not ok 6 Masking out a supported rate in HT capabilities
kunit: Missing mandatory rates for 4 Nss, rx 0, tx 2 oper 2, disable VHT
kunit: required MCSes not supported, disabling VHT
        ok 7 Masking out a RX rate in VHT capabilities
kunit: Missing mandatory rates for 4 Nss, rx 2, tx 0 oper 2, disable VHT
kunit: required MCSes not supported, disabling VHT
        ok 8 Masking out a TX rate in VHT capabilities
kunit: Missing mandatory rates for 5 Nss, rx 0, tx 0 oper 2, disable VHT
kunit: required MCSes not supported, disabling VHT
        ok 9 AP has higher VHT requirement than client
        ok 10 all zero VHT basic rates are ignored (many APs broken)
kunit: Invalid rates for 3 Nss, rx 3, tx 3 oper 0, disable HE
kunit: required MCSes not supported, disabling HE
        ok 11 AP requires 3 HE streams but client only has two
        ok 12 all zero HE basic rates are ignored (iPhone workaround)
kunit: required MCSes not supported, disabling EHT
        ok 13 AP requires too many RX streams with EHT MCS 7
kunit: required MCSes not supported, disabling EHT
        ok 14 AP requires too many TX streams with EHT MCS 7
kunit: required MCSes not supported, disabling EHT
kunit: required basic rate or BSS membership selectors not supported or disabled, rejecting connection
        ok 15 AP requires too many RX streams with EHT MCS 7 and EHT is required
kunit: regulatory prevented using AP config, downgraded
kunit: required bandwidth not supported, disabling EHT
        ok 16 80 MHz EHT is downgraded to 40 MHz HE due to puncturing
    # test_determine_chan_mode: pass:15 fail:1 skip:0 total:16
    not ok 1 test_determine_chan_mode
# Totals: pass:15 fail:1 skip:0 total:16