Subject: [net-next v3 2/3] net: motorcomm: phy: set drive strength in YT8531s RGMII

From: Minda Chen <[email-masked]>
Date: Fri, 8 May 2026 17:45:21 +0800

Set RXD and RX CLK pin drive strength while in YT8531s connect
with RGMII.

Signed-off-by: Minda Chen <[email-masked]>
---
 drivers/net/phy/motorcomm.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c
index c66804537aa2..ebc24f51e626 100644
--- a/drivers/net/phy/motorcomm.c
+++ b/drivers/net/phy/motorcomm.c
@@ -1698,6 +1698,11 @@ static int yt8521_config_init(struct phy_device *phydev)
 		if (ret < 0)
 			goto err_restore_page;
 	}
+
+	if (phydev->drv->phy_id == PHY_ID_YT8531S &&
+	    phy_interface_is_rgmii(phydev))
+		ret = yt8531_set_ds(phydev);
+
 err_restore_page:
 	return phy_restore_page(phydev, old_page, ret);
 }
-- 
2.17.1