Subject: [net-next v6 2/3] net: motorcomm: phy: set drive strength in YT8531s RGMII

From: Minda Chen <[email-masked]>
Date: Fri, 5 Jun 2026 14:02:11 +0800

Set RXD and RX CLK pin drive strength while in YT8531s connect
with RGMII. Need to check 8531s PHY ID because 8521 and 8531s
pin drive strength is different, 8521 can not call
yt8531_set_ds().

Signed-off-by: Minda Chen <[email-masked]>
Reviewed-by: Andrew Lunn <[email-masked]>
---
 drivers/net/phy/motorcomm.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c
index 688679457ef9..dcba50007451 100644
--- a/drivers/net/phy/motorcomm.c
+++ b/drivers/net/phy/motorcomm.c
@@ -1697,6 +1697,11 @@ static int yt8521_config_init(struct phy_device *phydev)
 		if (ret < 0)
 			goto err_restore_page;
 	}
+
+	if (phy_interface_is_rgmii(phydev) &&
+	    phydev_id_compare(phydev, PHY_ID_YT8531S))
+		ret = yt8531_set_ds(phydev);
+
 err_restore_page:
 	return phy_restore_page(phydev, old_page, ret);
 }
-- 
2.17.1