Subject: Re: [PATCH 1/1] More ethtool support for sis900

From: Jeff Garzik <[email-masked]>
Date: Sat, 05 Mar 2005 13:28:02 -0500

Daniele Venzano wrote:
> 
> Add support for using generic mii interface
> Add support for the following ethtool ops:
> 	- get_link
> 	- get_settings
> 	- set_settings
> 	- nway_reset
> 
> 
> 
> Signed-off-by: Daniele Venzano <[email-masked]>
> 
> 
> ------------------------------------------------------------------------
> 
> Index: sis900.c
> ===================================================================
> --- a/drivers/net/sis900.c	(revision 95)
> +++ b/drivers/net/sis900.c	(revision 97)
> @@ -161,6 +161,7 @@
>  	struct mii_phy * mii;
>  	struct mii_phy * first_mii; /* record the first mii structure */
>  	unsigned int cur_phy;
> +	struct mii_if_info mii_info;
>  
>  	struct timer_list timer; /* Link status detection timer. */
>  	u8 autong_complete; /* 1: auto-negotiate complete  */
> @@ -199,7 +200,7 @@
>  static int sis900_mii_probe (struct net_device * net_dev);
>  static void sis900_init_rxfilter (struct net_device * net_dev);
>  static u16 read_eeprom(long ioaddr, int location);
> -static u16 mdio_read(struct net_device *net_dev, int phy_id, int location);
> +static int mdio_read(struct net_device *net_dev, int phy_id, int location);
>  static void mdio_write(struct net_device *net_dev, int phy_id, int location, int val);
>  static void sis900_timer(unsigned long data);
>  static void sis900_check_mode (struct net_device *net_dev, struct mii_phy *mii_phy);
> @@ -468,7 +469,13 @@
>  		sis_priv->msg_enable = sis900_debug;
>  	else
>  		sis_priv->msg_enable = SIS900_DEF_MSG;
> -	
> +
> +	sis_priv->mii_info.dev = net_dev;
> +	sis_priv->mii_info.mdio_read = mdio_read;
> +	sis_priv->mii_info.mdio_write = mdio_write;
> +	sis_priv->mii_info.phy_id_mask = 0x1f;
> +	sis_priv->mii_info.reg_num_mask = 0x1f;
> +
>  	ret = register_netdev(net_dev);
>  	if (ret)
>  		goto err_unmap_rx;
> @@ -507,6 +514,8 @@
>  		goto err_out_unregister;
>  	}
>  
> +	sis_priv->mii_info.phy_id = sis_priv->cur_phy;
> +
>  	/* save our host bridge revision */
>  	dev = pci_get_device(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_630, NULL);
>  	if (dev) {
> @@ -843,7 +852,7 @@
>   *	Please see SiS7014 or ICS spec
>   */
>  
> -static u16 mdio_read(struct net_device *net_dev, int phy_id, int location)
> +static int mdio_read(struct net_device *net_dev, int phy_id, int location)
>  {
>  	long mdio_addr = net_dev->base_addr + mear;
>  	int mii_cmd = MIIread|(phy_id<<MIIpmdShift)|(location<<MIIregShift);
> @@ -1943,10 +1952,41 @@
>  	sis_priv->msg_enable = value;
>  }
>  
> +static u32 sis900_get_link(struct net_device *net_dev)
> +{
> +	struct sis900_private *sis_priv = net_dev->priv;
> +	return mii_link_ok(&sis_priv->mii_info);
> +}
> +
> +static int sis900_get_settings(struct net_device *net_dev,
> +				struct ethtool_cmd *cmd)
> +{
> +	struct sis900_private *sis_priv = net_dev->priv;
> +	mii_ethtool_gset(&sis_priv->mii_info, cmd);
> +	return 0;
> +}
> +
> +static int sis900_set_settings(struct net_device *net_dev,
> +				struct ethtool_cmd *cmd)
> +{
> +	struct sis900_private *sis_priv = net_dev->priv;
> +	return mii_ethtool_sset(&sis_priv->mii_info, cmd);
> +}
> +
> +static int sis900_nway_reset(struct net_device *net_dev)
> +{
> +	struct sis900_private *sis_priv = net_dev->priv;
> +	return mii_nway_restart(&sis_priv->mii_info);
> +}

I should think you want locking for these, as is present in other drivers...

	Jeff