Subject: Re: [PATCH v1 3/4] net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator

From: Heiko Stübner <[email-masked]>
Date: Mon, 19 Jan 2015 21:12:44 +0100

Am Montag, 19. Januar 2015, 18:08:08 schrieb Romain Perier:
> Currently, dwmac-rk uses a custom propety "phy_regulator" to get the name of
> the right regulator to use to power on or power off the phy. This commit
> converts the driver to use phy-supply devicetree property and the
> corresponding API, it cleans the code a bit and make it simpler to
> maintain.
> 
> Signed-off-by: Romain Perier <[email-masked]>

I don't see updated binding documentation in here.

Secondly I think patch4 which changes the property in the evb-rk808 could be 
in here. The change is simple enough and would keep it bisectable without 
needing transistional patches.

And there is the one warning down below.

> ---
>  drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 61
> ++++++++------------------ 1 file changed, 19 insertions(+), 42
> deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c index 06e1637..8a8091c
> 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> @@ -32,7 +32,7 @@
>  struct rk_priv_data {
>  	struct platform_device *pdev;
>  	int phy_iface;
> -	char regulator[32];
> +	struct regulator *regulator;
> 
>  	bool clk_enabled;
>  	bool clock_input;
> @@ -287,46 +287,25 @@ static int gmac_clk_enable(struct rk_priv_data
> *bsp_priv, bool enable)
> 
>  static int phy_power_on(struct rk_priv_data *bsp_priv, bool enable)
>  {
> -	struct regulator *ldo;
> -	char *ldostr = bsp_priv->regulator;
> +	struct regulator *ldo = bsp_priv->regulator;
>  	int ret;
>  	struct device *dev = &bsp_priv->pdev->dev;
> 
> -	if (!ldostr) {
> -		dev_err(dev, "%s: no ldo found\n", __func__);
> +	if (!ldo) {
> +		dev_err(dev, "%s: no regulator found\n", __func__);
>  		return -1;
>  	}
> 
> -	ldo = regulator_get(NULL, ldostr);
> -	if (!ldo) {
> -		dev_err(dev, "\n%s get ldo %s failed\n", __func__, ldostr);
> +	if (enable) {
> +		ret = regulator_enable(ldo);
> +		if (ret)
> +			dev_err(dev, "%s: fail to enable phy-supply\n",
> +				__func__);
>  	} else {
> -		if (enable) {
> -			if (!regulator_is_enabled(ldo)) {
> -				ret = regulator_enable(ldo);
> -				if (ret != 0)
> -					dev_err(dev, "%s: fail to enable %s\n",
> -						__func__, ldostr);
> -				else
> -					dev_info(dev, "turn on ldo done.\n");
> -			} else {
> -				dev_warn(dev, "%s is enabled before enable",
> -					 ldostr);
> -			}
> -		} else {
> -			if (regulator_is_enabled(ldo)) {
> -				ret = regulator_disable(ldo);
> -				if (ret != 0)
> -					dev_err(dev, "%s: fail to disable %s\n",
> -						__func__, ldostr);
> -				else
> -					dev_info(dev, "turn off ldo done.\n");
> -			} else {
> -				dev_warn(dev, "%s is disabled before disable",
> -					 ldostr);
> -			}
> -		}
> -		regulator_put(ldo);
> +		ret = regulator_disable(ldo);
> +		if (ret)
> +			dev_err(dev, "%s: fail to disable phy-supply\n",
> +				__func__);
>  	}
> 
>  	return 0;
> @@ -346,14 +325,12 @@ static void *rk_gmac_setup(struct platform_device
> *pdev)
> 
>  	bsp_priv->phy_iface = of_get_phy_mode(dev->of_node);
> 
> -	ret = of_property_read_string(dev->of_node, "phy_regulator", &strings);
> -	if (ret) {
> -		dev_warn(dev, "%s: Can not read property: phy_regulator.\n",
> -			 __func__);
> -	} else {
> -		dev_info(dev, "%s: PHY power controlled by regulator(%s).\n",
> -			 __func__, strings);
> -		strcpy(bsp_priv->regulator, strings);
> +	bsp_priv->regulator = devm_regulator_get_optional(dev, "phy");
> +	if (IS_ERR(bsp_priv->regulator)) {
> +		if (PTR_ERR(bsp_priv->regulator) == -EPROBE_DEFER)
> +			return -EPROBE_DEFER;

this should be return ERR_PTR(-EPROBE_DEFER) and produces a warning in its 
current state

> +		dev_err(dev, "no regulator found\n");
> +		bsp_priv->regulator = NULL;
>  	}
> 
>  	ret = of_property_read_string(dev->of_node, "clock_in_out", &strings);

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email-masked]
More majordomo info at  http://vger.kernel.org/majordomo-info.html