Subject: Re: [PATCH] net: stmmac: dwmac-loongson: Add fix_soc_reset function

From: Yanteng Si <[email-masked]>
Date: Tue, 21 Jan 2025 21:41:46 +0800

在 1/21/25 16:25, Qunqin Zhao 写道:
> Loongson's GMAC device takes nearly two seconds to complete DMA reset,
> however, the default waiting time for reset is 200 milliseconds
Is only GMAC like this?
>
> Signed-off-by: Qunqin Zhao <[email-masked]>
> ---
>   .../net/ethernet/stmicro/stmmac/dwmac-loongson.c    | 13 +++++++++++++
>   1 file changed, 13 insertions(+)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> index bfe6e2d631bd..35639d26256c 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
> @@ -516,6 +516,18 @@ static int loongson_dwmac_acpi_config(struct pci_dev *pdev,
>   	return 0;
>   }
>   
How about putting a part of the commit message here as a comment?
> +static int loongson_fix_soc_reset(void *priv, void __iomem *ioaddr)

> +{
> +	u32 value = readl(ioaddr + DMA_BUS_MODE);
> +
> +	value |= DMA_BUS_MODE_SFT_RESET;
> +	writel(value, ioaddr + DMA_BUS_MODE);
> +
> +	return readl_poll_timeout(ioaddr + DMA_BUS_MODE, value,
> +				  !(value & DMA_BUS_MODE_SFT_RESET),
> +				  10000, 2000000);
> +}
> +
>   static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>   {
>   	struct plat_stmmacenet_data *plat;
> @@ -566,6 +578,7 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
>   
>   	plat->bsp_priv = ld;
>   	plat->setup = loongson_dwmac_setup;
> +	plat->fix_soc_reset = loongson_fix_soc_reset;

If only GMAC needs to be done this way, how about putting it inside the 
loongson_gmac_data()?

Thanks,

Yanteng