Subject: Re: [Bugme-new] [Bug 9721] New: wake on lan fails with sky2 module

From: supersud501 <[email-masked]>
Date: Sun, 13 Jan 2008 16:08:38 +0100

supersud501 wrote:
> 
> 
> Rafael J. Wysocki wrote:
> 
>>
>> Since it seems to be 100% reproducible, it would be very helpful if 
>> you could
>> use git-bisect to identify the offending commit.
>>
> 
> allright, bisect found the offending commit, here's what i've done:
> 
> first i started bisect with the following command (since i assumed it is 
> a net-driver problem):
> 
> git-bisect start 'v2.6.24-rc6' 'v2.6.23' '--' 'drivers/net/'
> 
> after building many kernels and saying good/bad if wol worked/didn't 
> work etc. it identified the following commit:
> 
> # bad: [ac93a3946b676025fa55356180e8321639744b31] sky2: enable PCI 
> config writes
> 
> and refs/bisect/bad gives:
> 
> 14:16:53 /usr/src/linux-2.6/.git # cat refs/bisect/bad
> ac93a3946b676025fa55356180e8321639744b31
> 
> 
> need some more info?
> 

i just checked it: commented out the passage of the commit in kernel 
2.6.24-rc7-git4 and compiled it: wol WORKS. so this one line is causing 
my wol-disturbance...

but i noticed another "bug" on 2.6.24-rc7-git with sky2: dmesg shows a 
lot of lines every 5 seconds:

[...]
[  357.400462] sky2 0000:02:00.0: error interrupt status=0xc0000000
[  362.442039] printk: 41 messages suppressed.
[  362.442043] sky2 0000:02:00.0: error interrupt status=0x80000000
[  367.439151] printk: 18 messages suppressed.
[  367.439156] sky2 0000:02:00.0: error interrupt status=0x80000000
[  372.436267] printk: 30 messages suppressed.
[  372.436271] sky2 0000:02:00.0: error interrupt status=0x80000000
[  377.350236] printk: 19 messages suppressed.
[...]

since i do not notice any errors (yet) i'll wait till next rc, maybe it 
will be gone then...

but i'm happy wol works again on 2.6.24 :)