Subject: [PATCH 2/2] Fix 88e1111 copper/fiber selection in RGMII mode

From: Wang Jian <[email-masked]>
Date: Fri, 11 Jul 2008 08:55:31 +0800

MII_M1111_HWCFG_FIBER_COPPER_RES is a bit of MII_M1111_PHY_EXT_SR, not
MII_M1111_PHY_EXT_CR.

Signed-off-by: Wang Jian <[email-masked]>
---
 drivers/net/phy/marvell.c |    5 +----
 1 files changed, 1 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 737512c..4aa5479 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -158,7 +158,6 @@ static int m88e1111_config_init(struct phy_device
*phydev)
 {
 	int err;
 	int temp;
-	int mode;

 	/* Enable Fiber/Copper auto selection */
 	temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
@@ -198,9 +197,7 @@ static int m88e1111_config_init(struct phy_device
*phydev)

 		temp &= ~(MII_M1111_HWCFG_MODE_MASK);

-		mode = phy_read(phydev, MII_M1111_PHY_EXT_CR);
-
-		if (mode & MII_M1111_HWCFG_FIBER_COPPER_RES)
+		if (temp & MII_M1111_HWCFG_FIBER_COPPER_RES)
 			temp |= MII_M1111_HWCFG_MODE_FIBER_RGMII;
 		else
 			temp |= MII_M1111_HWCFG_MODE_COPPER_RGMII;
-- 
1.5.5.4