Subject: [PATCH] skge: Make sure both ports initialize correctly

From: Mike McCormack <[email-masked]>
Date: Wed, 23 Sep 2009 22:50:36 +0900

If allocation of the second ports fails, make sure that hw->ports
 is not 2 otherwise we'll crash trying to access the second port.

This fix is copied from a similar fix in the sky2 driver (ca519274...),
but is untested, as I don't have a skge card.

Signed-off-by: Mike McCormack <[email-masked]>
---
 drivers/net/skge.c |    9 ++++++---
 1 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 62e852e..21b816f 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -3982,14 +3982,17 @@ static int __devinit skge_probe(struct pci_dev *pdev,
 	}
 	skge_show_addr(dev);
 
-	if (hw->ports > 1 && (dev1 = skge_devinit(hw, 1, using_dac))) {
-		if (register_netdev(dev1) == 0)
+	if (hw->ports > 1) {
+		dev1 = skge_devinit(hw, 1, using_dac);
+		if (dev1 && register_netdev(dev1) == 0)
 			skge_show_addr(dev1);
 		else {
 			/* Failure to register second port need not be fatal */
 			dev_warn(&pdev->dev, "register of second port failed\n");
 			hw->dev[1] = NULL;
-			free_netdev(dev1);
+			hw->ports = 1;
+			if (dev1)
+				free_netdev(dev1);
 		}
 	}
 	pci_set_drvdata(pdev, hw);
-- 
1.5.6.5