From: Mike McCormack <mikem@ring3k•org>
To: Stephen Hemminger <shemminger@vyatta•com>
Cc: netdev@vger•kernel.org
Subject: [PATCH 1/3] sky2: Factor out code to calculate packet sizes
Date: Thu, 28 Jan 2010 00:05:14 +0900 [thread overview]
Message-ID: <4B60562A.1020808@ring3k.org> (raw)
Move code to calculate receive threshold and packet size out of
sky2_rx_start() so that is can be called from elsewhere easily.
Signed-off-by: Mike McCormack <mikem@ring3k•org>
---
drivers/net/sky2.c | 57 +++++++++++++++++++++++++++++++++------------------
1 files changed, 37 insertions(+), 20 deletions(-)
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 0b47c7f..2061eb8 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1064,6 +1064,40 @@ static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
return le;
}
+static unsigned sky2_get_rx_threshold(struct sky2_port* sky2)
+{
+ unsigned size;
+
+ /* Space needed for frame data + headers rounded up */
+ size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
+
+ /* Stopping point for hardware truncation */
+ return (size - 8) / sizeof(u32);
+}
+
+static unsigned sky2_get_rx_data_size(struct sky2_port* sky2)
+{
+ struct rx_ring_info *re;
+ unsigned size;
+
+ /* Space needed for frame data + headers rounded up */
+ size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
+
+ sky2->rx_nfrags = size >> PAGE_SHIFT;
+ BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr));
+
+ /* Compute residue after pages */
+ size -= sky2->rx_nfrags << PAGE_SHIFT;
+
+ /* Optimize to handle small packets and headers */
+ if (size < copybreak)
+ size = copybreak;
+ if (size < ETH_HLEN)
+ size = ETH_HLEN;
+
+ return size;
+}
+
/* Build description to hardware for one receive segment */
static void sky2_rx_add(struct sky2_port *sky2, u8 op,
dma_addr_t map, unsigned len)
@@ -1337,7 +1371,7 @@ static int sky2_rx_start(struct sky2_port *sky2)
struct sky2_hw *hw = sky2->hw;
struct rx_ring_info *re;
unsigned rxq = rxqaddr[sky2->port];
- unsigned i, size, thresh;
+ unsigned i, thresh;
sky2->rx_put = sky2->rx_next = 0;
sky2_qset(hw, rxq);
@@ -1358,25 +1392,7 @@ static int sky2_rx_start(struct sky2_port *sky2)
if (!(hw->flags & SKY2_HW_NEW_LE))
rx_set_checksum(sky2);
- /* Space needed for frame data + headers rounded up */
- size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
-
- /* Stopping point for hardware truncation */
- thresh = (size - 8) / sizeof(u32);
-
- sky2->rx_nfrags = size >> PAGE_SHIFT;
- BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr));
-
- /* Compute residue after pages */
- size -= sky2->rx_nfrags << PAGE_SHIFT;
-
- /* Optimize to handle small packets and headers */
- if (size < copybreak)
- size = copybreak;
- if (size < ETH_HLEN)
- size = ETH_HLEN;
-
- sky2->rx_data_size = size;
+ sky2->rx_data_size = sky2_get_rx_data_size(sky2);
/* Fill Rx ring */
for (i = 0; i < sky2->rx_pending; i++) {
@@ -1401,6 +1417,7 @@ static int sky2_rx_start(struct sky2_port *sky2)
* the register is limited to 9 bits, so if you do frames > 2052
* you better get the MTU right!
*/
+ thresh = sky2_get_rx_threshold(sky2);
if (thresh > 0x1ff)
sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF);
else {
--
1.5.6.5
reply other threads:[~2010-01-27 15:09 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B60562A.1020808@ring3k.org \
--to=mikem@ring3k$(echo .)org \
--cc=netdev@vger$(echo .)kernel.org \
--cc=shemminger@vyatta$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox