From: Wolfgang Grandegger <wg-5Yr1BZd7O62+XT7JhA+gdA@public•gmane.org>
To: "Ira W. Snyder" <iws-lulEs6mt1IksTUYHLfqkUA@public•gmane.org>
Cc: Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public•gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public•gmane.org
Subject: Re: [net-next-2.6 v2] can: add support for CAN interface cards based on the PLX90xx PCI bridge
Date: Mon, 01 Feb 2010 21:31:06 +0100 [thread overview]
Message-ID: <4B673A0A.5080504@grandegger.com> (raw)
In-Reply-To: <20100201195611.GB32624-lulEs6mt1IksTUYHLfqkUA@public.gmane.org>
Ira W. Snyder wrote:
> On Tue, Feb 02, 2010 at 01:42:44AM +0600, Pavel B. Cheblakov wrote:
>> From: Pavel Cheblakov <P.B.Cheblakov-tHBF8D5G73F4OK5fxMSSsQ@public•gmane.org>
>>
>> This driver is for CAN interface cards based on the PLX90xx PCI bridge.
>> Driver supports now:
>> - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
>> - Adlink PCI-7841/cPCI-7841 SE card
>> - Marathon CAN-bus-PCI card (http://www.marathon.ru/)
>> - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
>>
>> Changes since v1:
>> - Added some defines for static inline int plx_pci_check_sja1000(...)
>> - static struct pci_device_id plx_pci_tbl[] replaced by
>> static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl)
>> - Typo fixed
>>
>
> Hello,
>
> Any ideas if this driver could support the Janz PCI CAN cards as well? I
> don't have any documentation for the cards, and I'd love to get away
> from their closed-source drivers.
Is it a passive or and intelligent CAN PCI card? What is the name of the
card? A intelligent card will run its own firmware and you do not have
direct access to the SJA1000. Pavel plx_pci driver is quite generic and
it should not be a big deal to support a PLX90xx based passive card.
Wolfgang.
Wolfgang.
next prev parent reply other threads:[~2010-02-01 20:31 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-01 19:42 [net-next-2.6 v2] can: add support for CAN interface cards based on the PLX90xx PCI bridge Pavel B. Cheblakov
2010-02-01 19:56 ` Ira W. Snyder
[not found] ` <20100201195611.GB32624-lulEs6mt1IksTUYHLfqkUA@public.gmane.org>
2010-02-01 20:31 ` Wolfgang Grandegger [this message]
[not found] ` <4B673A0A.5080504-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2010-02-01 21:05 ` Ira W. Snyder
[not found] ` <20100201210507.GD32624-lulEs6mt1IksTUYHLfqkUA@public.gmane.org>
2010-02-02 8:02 ` Wolfgang Grandegger
[not found] ` <1265053364-24099-1-git-send-email-chebl-LmX6Lu7C9G7nhuLbLO4Grw@public.gmane.org>
2010-02-01 20:48 ` Wolfgang Grandegger
2010-02-04 2:39 ` David Miller
-- strict thread matches above, loose matches on Subject: below --
2010-02-01 19:30 Pavel Cheblakov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B673A0A.5080504@grandegger.com \
--to=wg-5yr1bzd7o62+xt7jha+gda@public$(echo .)gmane.org \
--cc=Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public$(echo .)gmane.org \
--cc=iws-lulEs6mt1IksTUYHLfqkUA@public$(echo .)gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public$(echo .)gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox