Subject: Re: [net-next-2.6 v2] can: add support for CAN interface cards based on the PLX90xx PCI bridge

From: Wolfgang Grandegger <[email-masked]>
Date: Mon, 01 Feb 2010 21:48:25 +0100

Pavel B. Cheblakov wrote:
> From: Pavel Cheblakov <[email-masked]>
> 
> This driver is for CAN interface cards based on the PLX90xx PCI bridge.
> Driver supports now:
>  - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
>  - Adlink PCI-7841/cPCI-7841 SE card
>  - Marathon CAN-bus-PCI card (http://www.marathon.ru/)
>  - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
> 
> Changes since v1:
>  - Added some defines for static inline int plx_pci_check_sja1000(...)
>  - static struct pci_device_id plx_pci_tbl[] replaced by
>    static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl)
>  - Typo fixed
> 
> Signed-off-by: Pavel Cheblakov <[email-masked]>
> Acked-by: Wolfgang Grandegger <[email-masked]>

Looks good now. The interface seems now generic enough to support other
PLX09xx based CAN cards as well.

Thanks for your contribution.

Wolfgang.