Subject: Re: eth1: Detected Hardware Unit Hang

From: Paweł Staszewski <[email-masked]>
Date: Wed, 31 Mar 2010 22:06:00 +0200

W dniu 2010-03-31 21:59, Tantilov, Emil S pisze:
> Paweł Staszewski wrote:
>    
>> W dniu 2010-03-31 20:03, Tantilov, Emil S pisze:
>>      
>>> Pawel Staszewski wrote:
>>>
>>>        
>>>> Hello
>>>>
>>>> I reproduce this problem on other machine with the same hardware and
>>>> here is dmesg output: (kernel 2.6.33)
>>>>
>>>> Mar 27 18:19:16 TM_01_C1 [1817894.769395] 0000:04:00.0: eth0:
>>>> Detected Hardware Unit Hang: Mar 27 18:19:16 TM_01_C1
>>>> [1817894.769396]   TDH<2e>
>>>> Mar 27 18:19:16 TM_01_C1 [1817894.769397]   TDT<1a>
>>>> Mar 27 18:19:16 TM_01_C1 [1817894.769397]   next_to_use<1a>
>>>> Mar 27 18:19:16 TM_01_C1 [1817894.769398]   next_to_clean<2d>
>>>> Mar 27 18:19:16 TM_01_C1 [1817894.769398]
>>>> buffer_info[next_to_clean]: Mar 27 18:19:16 TM_01_C1
>>>> [1817894.769399]   time_stamp<11b1591e9>
>>>> Mar 27 18:19:16 TM_01_C1 [1817894.769399]   next_to_watch<2f>
>>>> Mar 27 18:19:16 TM_01_C1 [1817894.769400]   jiffies<11b1592e4>
>>>> Mar 27 18:19:16 TM_01_C1 [1817894.769401]   next_to_watch.status<0>
>>>> Mar 27 18:19:16 TM_01_C1 [1817894.769401] MAC Status<80080783>
>>>> Mar 27 18:19:16 TM_01_C1 [1817894.769402] PHY Status<796d>
>>>> Mar 27 18:19:16 TM_01_C1 [1817894.769402] PHY 1000BASE-T
>>>> Status<3800>  Mar 27 18:19:16 TM_01_C1 [1817894.769403] PHY Extended
>>>> Status<3000>  Mar 27 18:19:16 TM_01_C1 [1817894.769404] PCI
>>>> Status<10>
>>>> Mar 27 18:19:18 TM_01_C1 [1817896.773365] 0000:04:00.0: eth0:
>>>> Detected Hardware Unit Hang: Mar 27 18:19:18 TM_01_C1
>>>> [1817896.773367]   TDH<2e>
>>>> Mar 27 18:19:18 TM_01_C1 [1817896.773368]   TDT<1a>
>>>> Mar 27 18:19:18 TM_01_C1 [1817896.773368]   next_to_use<1a>
>>>> Mar 27 18:19:18 TM_01_C1 [1817896.773369]   next_to_clean<2d>
>>>> Mar 27 18:19:18 TM_01_C1 [1817896.773369]
>>>> buffer_info[next_to_clean]: Mar 27 18:19:18 TM_01_C1
>>>> [1817896.773370]   time_stamp<11b1591e9>
>>>> Mar 27 18:19:18 TM_01_C1 [1817896.773370]   next_to_watch<2f>
>>>> Mar 27 18:19:18 TM_01_C1 [1817896.773371]   jiffies<11b1594d8>
>>>> Mar 27 18:19:18 TM_01_C1 [1817896.773372]   next_to_watch.status<0>
>>>> Mar 27 18:19:18 TM_01_C1 [1817896.773372] MAC Status<80080783>
>>>> Mar 27 18:19:18 TM_01_C1 [1817896.773373] PHY Status<796d>
>>>> Mar 27 18:19:18 TM_01_C1 [1817896.773373] PHY 1000BASE-T
>>>> Status<3800>  Mar 27 18:19:18 TM_01_C1 [1817896.773374] PHY Extended
>>>> Status<3000>  Mar 27 18:19:18 TM_01_C1 [1817896.773375] PCI
>>>> Status<10>
>>>> Mar 27 18:19:20 TM_01_C1 [1817898.769353] 0000:04:00.0: eth0:
>>>> Detected
>>>>
>>>>          
>>> <snip>
>>>
>>> I have a similar (not the same model) system in the lab with
>>> 82573E/L on board, but was not able to reproduce the Tx hangs you
>>> reported. So at this point we need to start looking into more
>>> details. Could you please file a bug at e1000.sf.net? Include the
>>> information you provided so far and also:
>>> 1. output from ethtoool -e
>>> 2. ethtool -d
>>> 3. cat /proc/interrupts
>>> 4. full dmesg output from boot to the point where Tx hangs occurred.
>>> 5. kernel config file
>>>
>>> Looking at the description of your system (Supermicro X7DCT) I see
>>> this board has IPMI option. Do you have IPMI in your system?
>>>
>>>
>>>        
>> Aditional informations are in attached files.
>> Yes there is IPMI option but i don't have it.
>>
>> And yes i will make a bugreport at e1000.sf.net.
>>      
> Thanks Pawel, for the quick reply. I see that you have disabled flow control. Is that on purpose? What is your link partner?
>
>    
Yes i always disable flow control  - link partner is 3Com Switch

> Thanks,
> Emil