Subject: Re: [PATCH net-next-2.6 1/2] dcbnl: add support for retrieving peer configuration - ieee

From: John Fastabend <[email-masked]>
Date: Thu, 24 Feb 2011 12:37:26 -0800

On 2/24/2011 1:03 PM, Shmulik Ravid wrote:
> These 2 patches add the support for retrieving the remote or peer DCBX
> configuration via dcbnl for embedded DCBX stacks. The peer configuration
> is part of the DCBX MIB and is useful for debugging and diagnostics of
> the overall DCB configuration. The first patch add this support for IEEE
> 802.1Qaz standard the second patch add the same support for the older
> CEE standard. 
> 
> Signed-off-by: Shmulik Ravid <[email-masked]>
> ---
>  include/linux/dcbnl.h |   38 ++++++++++++++++++++++++++
>  include/net/dcbnl.h   |    5 +++
>  net/dcb/dcbnl.c       |   71 +++++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 114 insertions(+), 0 deletions(-)
> 
> diff --git a/include/linux/dcbnl.h b/include/linux/dcbnl.h
> index 4c5b26e..3102185 100644
> --- a/include/linux/dcbnl.h
> +++ b/include/linux/dcbnl.h
> @@ -110,6 +110,22 @@ struct dcb_app {
>  	__u16	protocol;
>  };
>  
> +/* This structure contains the APP feature information sent by the peer.
> + * It is used for both the IEEE 802.1Qaz and the CEE flavors.
> + *
> + * @willing: willing bit in the peer APP tlv
> + * @error: error bit in the peer APP tlv
> + * @app_count: The number of objects in the peer APP table.
> + *
> + * In addition to this information the full peer APP tlv also contains
> + * a table of 'app_count' APP objects defined above.
> + */
> +struct dcb_peer_app_info {
> +	__u8	willing;
> +	__u8	error;
> +	__u16	app_count;
> +};
> +

The IEEE 802.1Qaz spec defines the APP TLV as informational
so there are no willing or error bits in this case. See
section D.2.12 of the 802.1Qaz draft.

Can we drop these fields or do they have some other meaning
here?

Thanks,
John.