From: Prasanna Panchamukhi <ppanchamukhi@riverbed•com>
To: Jeff Kirsher <jeffrey.t.kirsher@intel•com>
Cc: "Allan, Bruce W" <bruce.w.allan@intel•com>,
"Pieper, Jeffrey E" <jeffrey.e.pieper@intel•com>,
"e1000-devel@lists•sourceforge.net"
<e1000-devel@lists•sourceforge.net>,
"netdev@vger•kernel.org" <netdev@vger•kernel.org>
Subject: Re: [PATCH] e1000: power off PHY after reset when interface is down
Date: Fri, 04 Mar 2011 14:41:44 -0800 [thread overview]
Message-ID: <4D716AA8.4060508@riverbed.com> (raw)
In-Reply-To: <4D71298F.6090009@riverbed.com>
On 03/04/2011 10:03 AM, Prasanna Panchamukhi wrote:
> On 03/04/2011 12:19 AM, Jeff Kirsher wrote:
>> On Wed, Feb 23, 2011 at 16:02, Jeff Kirsher<jeffrey.t.kirsher@intel•com> wrote:
>>> On Tue, 2011-02-22 at 17:25 -0800, prasanna.panchamukhi@riverbed•com
>>> wrote:
>>>> From: Prasanna S. Panchamukhi<prasanna.panchamukhi@riverbed•com>
>>>>
>>>> Some Phys supported by the e1000 driver do not remain powered off
>>>> across
>>>> a reset of the device when the interface is down, e.g. on 82546.
>>>> This patch powers down (only when WoL is disabled) the PHY after reset
>>>> if
>>>> the interface is down and ethtool diagnostics are not currently
>>>> running.
>>>>
>>>> Similar problem was see on 82571 controller and was fixed in e1000e
>>>> driver
>>>> by Bruce Allan.
>>>> Please refer commit 31dbe5b4ac6fca72dec946e4d0fa7f0913f1d9b1 for
>>>> details.
>>>>
>>>> Signed-off-by: Prasanna S. Panchamukhi
>>>> <prasanna.panchamukhi@riverbed•com>
>>>> ---
>>>> drivers/net/e1000/e1000_ethtool.c | 27 +++++++++++++++++++--------
>>>> drivers/net/e1000/e1000_main.c | 7 +++++++
>>>> 2 files changed, 26 insertions(+), 8 deletions(-)
>>> Thanks Prasanna! I have added the patch to my queue of e1000 patches.
>>>
>> Prasanna-
>> Here is what we found during validating your patch:
>>
>> The behavior of 82546 device(s) seems to be identical with/without this patch
>> applied. 82546GB (LOM), dev_id 1079 powers down (with wol disabled) after
>> ifdown, but powers back up after approx. 10 seconds. 82546EB (NIC), dev_id
>> 1010 powers down (with wol disabled) after ifdown. Both of the above
>> behaviors are the same with and without the patch applied. Also, if this patch
>> DID work as expected, it should print a message after a reset, such as "Cannot
>> restart autonegotiation: Resource temporarily unavailable", which would mirror
>> the behavior of e1000e.
>>
> Hi Jeff,
>
> Below is the test case we run verify this fix:
>
> $ ethtool -s eth0 wol d
> $ ifconfig eth0 up
> $ mii-tool eth0
> eth0: negotiated 100baseTx-FD, link ok
> $ ifconfig eth0 down
> $ mii-tool eth0
> eth0: no link
> $ ethtool -s eth0 autoneg on (doesn't really matter what we do here)
> $ mii-tool eth0
> eth0: negotiated 100baseTx-FD, link ok (this should be: eth0: no link)
>
> I will re-run the test& check if does not fix this.
Hi Jeff,
I re-verified it & confirm that, this patch fixes the problem.
Please let me know if you have any issues.
Thanks
Prasanna
> Thanks
> Prasanna
>
>
>
prev parent reply other threads:[~2011-03-04 22:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-23 1:25 [PATCH] e1000: power off PHY after reset when interface is down prasanna.panchamukhi
2011-02-24 0:02 ` Jeff Kirsher
2011-03-04 8:19 ` Jeff Kirsher
2011-03-04 18:03 ` Prasanna Panchamukhi
2011-03-04 22:41 ` Prasanna Panchamukhi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D716AA8.4060508@riverbed.com \
--to=ppanchamukhi@riverbed$(echo .)com \
--cc=bruce.w.allan@intel$(echo .)com \
--cc=e1000-devel@lists$(echo .)sourceforge.net \
--cc=jeffrey.e.pieper@intel$(echo .)com \
--cc=jeffrey.t.kirsher@intel$(echo .)com \
--cc=netdev@vger$(echo .)kernel.org \
--cc=prasanna.panchamukhi@riverbed$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox