Subject: Re: [RFC v2 2/2] e100: Support RXFCS feature flag.

From: Ben Greear <[email-masked]>
Date: Wed, 29 Jun 2011 07:22:08 -0700

On 06/29/2011 04:37 AM, Michał Mirosław wrote:
> 2011/6/24<[email-masked]>:
>> From: Ben Greear<[email-masked]>
>>
>> This allows e100 to be configured to append the
>> Ethernet FCS to the skb.
>>
>> Useful for sniffing networks.
>>
>> Signed-off-by: Ben Greear<[email-masked]>
>> ---
>> :100644 100644 c1352c6... 761f6f5... M  drivers/net/e100.c
>>   drivers/net/e100.c |   15 ++++++++++++---
>>   1 files changed, 12 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/net/e100.c b/drivers/net/e100.c
>> index c1352c6..761f6f5 100644
>> --- a/drivers/net/e100.c
>> +++ b/drivers/net/e100.c
>> @@ -1089,6 +1089,7 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
>>   {
>>         struct config *config =&cb->u.config;
>>         u8 *c = (u8 *)config;
>> +       struct net_device *netdev = nic->netdev;
>>
>>         cb->command = cpu_to_le16(cb_config);
>>
>> @@ -1132,6 +1133,9 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
>>                 config->promiscuous_mode = 0x1;         /* 1=on, 0=off */
>>         }
>>
>> +       if (netdev->wanted_features&  NETIF_F_RXFCS)
>> +               config->rx_crc_transfer = 0x1;  /* 1=save, 0=discard */
>> +
>
> You should check netdev->features here.

I thought 'features' was what the NIC could support, and wanted_features
was what the NIC was currently configured to support?  I don't want
to rx the CRC all the time, just when users enable it...

Thanks,
Ben

-- 
Ben Greear <[email-masked]>
Candela Technologies Inc  http://www.candelatech.com