From: paul bilke <fsmail@conspiracy•net>
To: netdev@vger•kernel.org
Subject: Udp packets received with improper length
Date: Wed, 23 Nov 2011 14:14:04 -0600 [thread overview]
Message-ID: <4ECD540C.60108@conspiracy.net> (raw)
We recently updated an embedded powerpc platform from 2.6.32 to 2.6.37. When deployed in the field devices with the new kernel have started receiving truncated UDP packets from their mates across noisy links. To test we wrote a simple client and
server. The client sends 512 byte packets with a sequence number to the server listening on a UDP socket. On the client box we use netem to corrupt 100% of the packets sent(after transferring some data so arp cache is populated). The server then
dumps the length received and the serial number from any packets that are received. Netem sometimes corrupts bits in the source MAC address so these packets arrive with valid UDP checksums and are delivered to the user application. With the
server running on the 2.6.32 box we send a few million packets to it and only receive packets that are exactly 512 bytes long. When we do the same on the box running 2.6.37 we receive hundred of short packets, zero length and also 504 byte packets.
When I use TCPdump on the box running 2.6.37 the truncated packets have valid checksums (Source MAC was corrupted by NETEM) and are of proper length (554 byte ethernet frame, 540 Byte IP portion and 520 byte UDP length) but the userland receives 504
or 0 length in recvfrom. To see if this was just a powerpc related issue I repeated the test on x86 virtual machines. A vm running 2.6.18 (Centos 5) receives only 512 byte packets. On a vm running 2.6.40 (Fedora 15) I receive 512, 504 and 0 length
packets.
Below is a hex dump of a packet captured on the 2.6.37 box (its identical on the wire as captured by a probe) but is dispatched to the user application which receives it as a 504 byte packet.
This is problematic in our environment since the IP connectivity is typically a high error rate (Satellite or long haul microwave link).
I did not know if there is a known behavior change that was introduced after 2.6.32 (before .37) that would explain this behavior.
Any ideas what is going on here would be appreciated.
Paul Bilke
00e10c0000fe00115510132808004500
021c00004000401110360a0a0a450a0a
0a43b0971391020875b4323233333400
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
00000000000000000000
next reply other threads:[~2011-11-23 20:35 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-23 20:14 paul bilke [this message]
2011-11-28 21:23 ` Udp packets received with improper length paul bilke
2011-12-01 19:11 ` David Miller
2011-12-03 2:32 ` Gerrit Renker
2011-12-03 2:54 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ECD540C.60108@conspiracy.net \
--to=fsmail@conspiracy$(echo .)net \
--cc=netdev@vger$(echo .)kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox