Subject: Re: [PATCH 10/15] netvm: Propagate page->pfmemalloc from netdev_alloc_page to skb

From: Alexander Duyck <[email-masked]>
Date: Tue, 07 Feb 2012 15:38:44 -0800

On 02/06/2012 02:56 PM, Mel Gorman wrote:
> diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
> index e91d73c..c062909 100644
> --- a/drivers/net/ethernet/intel/igb/igb_main.c
> +++ b/drivers/net/ethernet/intel/igb/igb_main.c
> @@ -6187,7 +6187,7 @@ static bool igb_alloc_mapped_page(struct igb_ring *rx_ring,
>  		return true;
>  
>  	if (!page) {
> -		page = alloc_page(GFP_ATOMIC | __GFP_COLD);
> +		page = __netdev_alloc_page(GFP_ATOMIC, bi->skb);
>  		bi->page = page;
>  		if (unlikely(!page)) {
>  			rx_ring->rx_stats.alloc_failed++;

This takes care of the case where we are allocating the page, but what
about if we are reusing the page?  For this driver it might work better
to hold of on doing the association between the page and skb either
somewhere after the skb and the page have both been allocated, or in the
igb_clean_rx_irq path where we will have both the page and the data
accessible.
> diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> index 1ee5d0f..7a011c3 100644
> --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> @@ -1143,7 +1143,7 @@ void ixgbe_alloc_rx_buffers(struct ixgbe_ring *rx_ring, u16 cleaned_count)
>  
>  		if (ring_is_ps_enabled(rx_ring)) {
>  			if (!bi->page) {
> -				bi->page = alloc_page(GFP_ATOMIC | __GFP_COLD);
> +				bi->page = __netdev_alloc_page(GFP_ATOMIC, skb);
>  				if (!bi->page) {
>  					rx_ring->rx_stats.alloc_rx_page_failed++;
>  					goto no_buffers;

Same thing for this driver.
> diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
> index bed411b..f6ea14a 100644
> --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
> +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
> @@ -366,7 +366,7 @@ static void ixgbevf_alloc_rx_buffers(struct ixgbevf_adapter *adapter,
>  		if (!bi->page_dma &&
>  		    (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)) {
>  			if (!bi->page) {
> -				bi->page = alloc_page(GFP_ATOMIC | __GFP_COLD);
> +				bi->page = __netdev_alloc_page(GFP_ATOMIC, NULL);
>  				if (!bi->page) {
>  					adapter->alloc_rx_page_failed++;
>  					goto no_buffers;
> @@ -400,6 +400,7 @@ static void ixgbevf_alloc_rx_buffers(struct ixgbevf_adapter *adapter,
>  			 */
>  			skb_reserve(skb, NET_IP_ALIGN);
>  
> +			propagate_pfmemalloc_skb(bi->page_dma, skb);
>  			bi->skb = skb;
>  		}
>  		if (!bi->dma) {
I am pretty sure this is incorrect.  I believe you want bi->page, not
bi->page_dma.  This one is closer though to what I had in mind for igb
and ixgbe in terms of making it so there is only one location that
generates the association.

Also a similar changes would be needed for the igbvf , e1000, and e1000e
drivers in the Intel tree.

> diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
> index 17ed022..8da4ca0 100644
> --- a/include/linux/skbuff.h
> +++ b/include/linux/skbuff.h
> @@ -1696,6 +1696,44 @@ static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev,
>  }
>  
>  /**
> + *	__netdev_alloc_page - allocate a page for ps-rx on a specific device
> + *	@gfp_mask: alloc_pages_node mask. Set __GFP_NOMEMALLOC if not for network packet RX
> + *	@skb: skb to set pfmemalloc on if __GFP_MEMALLOC is used
> + *
> + * 	Allocate a new page. dev currently unused.
> + *
> + * 	%NULL is returned if there is no free memory.
> + */
> +static inline struct page *__netdev_alloc_page(gfp_t gfp_mask,
> +						struct sk_buff *skb)
> +{
> +	struct page *page;
> +
> +	gfp_mask |= __GFP_COLD;
> +
> +	if (!(gfp_mask & __GFP_NOMEMALLOC))
> +		gfp_mask |= __GFP_MEMALLOC;
> +
> +	page = alloc_pages_node(NUMA_NO_NODE, gfp_mask, 0);
> +	if (skb && page && page->pfmemalloc)
> +		skb->pfmemalloc = true;
> +
> +	return page;
> +}
> +
> +/**
> + *	propagate_pfmemalloc_skb - Propagate pfmemalloc if skb is allocated after RX page
> + *	@page: The page that was allocated from netdev_alloc_page
> + *	@skb: The skb that may need pfmemalloc set
> + */
> +static inline void propagate_pfmemalloc_skb(struct page *page,
> +						struct sk_buff *skb)
> +{
> +	if (page && page->pfmemalloc)
> +		skb->pfmemalloc = true;
> +}
> +
> +/**
>   * skb_frag_page - retrieve the page refered to by a paged fragment
>   * @frag: the paged fragment
>   *

Is this function even really needed?  It seems like you already have
this covered in your earlier patches, specifically 9/15, which takes
care of associating the skb and the page pfmemalloc flags when you use
skb_fill_page_desc.  It would be useful to narrow things down so that we
are associating this either at the allocation time or at the
fill_page_desc call instead of doing it at both.

Thanks,

Alex

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to [email-masked].  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"[email-masked]"> [email-masked] </a>