Subject: Re: [PATCH 2/3] drivers: net: ethernet: stmmac: fix failure in module test

From: Giuseppe CAVALLARO <[email-masked]>
Date: Tue, 22 May 2012 14:51:09 +0200

On 5/22/2012 9:38 AM, Bob Liu wrote:
> Module can't be compiled and installed in current Makefile.

I've just seen that I can generate the stmmac.ko on ARM and also on x86
with my configuration.

Can you post here you build failure?

In the meantime I'll test the module on ARM soon.

peppe

> 
> Signed-off-by: Bob Liu <[email-masked]>
> ---
>  drivers/net/ethernet/stmicro/stmmac/Makefile |   12 ++++++------
>  1 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
> index bc965ac..4b50922 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/Makefile
> +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
> @@ -1,10 +1,10 @@
>  obj-$(CONFIG_STMMAC_ETH) += stmmac.o
> -stmmac-$(CONFIG_STMMAC_TIMER) += stmmac_timer.o
> -stmmac-$(CONFIG_STMMAC_RING) += ring_mode.o
> -stmmac-$(CONFIG_STMMAC_CHAINED) += chain_mode.o
> -stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o
> -stmmac-$(CONFIG_STMMAC_PCI) += stmmac_pci.o
> +stmmac-$(CONFIG_STMMAC_TIMER:m=y) += stmmac_timer.o
> +stmmac-$(CONFIG_STMMAC_RING:m=y) += ring_mode.o
> +stmmac-$(CONFIG_STMMAC_CHAINED:m=y) += chain_mode.o
> +stmmac-$(CONFIG_STMMAC_PLATFORM:m=y) += stmmac_platform.o
> +stmmac-$(CONFIG_STMMAC_PCI:m=y) += stmmac_pci.o
>  stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o	\
>  	      dwmac_lib.o dwmac1000_core.o  dwmac1000_dma.o	\
>  	      dwmac100_core.o dwmac100_dma.o enh_desc.o  norm_desc.o \
> -	      mmc_core.o $(stmmac-y)
> +	      mmc_core.o