Subject: [PATCH] Add support for netconsole driver used on bridge device with, VIF attached

From: [email-masked]
Date: Mon, 21 Jan 2013 18:34:31 +0200

When starting a VM which has virtual interface attached to the same 
bridge (i.e vif = [type=netfront,bridge=xenbr0'] in vm.cfg) which is 
used for netconsole the
following message appears (after about 60 seconds) and VM creation 
operation fails.
      Error: Device 0 (vif) could not be connected. Hotplug scripts not 
working.

Note:
When trying to do the opposite, i.e. first create VM and then run
netconsole we got the error #524 - vif2.0 doesn't support polling,
aborting.

The following patch (to latest kernel) fix this bug by adding 
implementation to ndo_poll_controller.

0001-Add-support-for-netconsole-driver-used-on-bridge-dev.patch
0 2001
From: Yuval <[email-masked]>
Date: Tue, 8 Jan 2013 10:08:45 +0200
Subject: [PATCH] Add support for netconsole driver used on bridge device 
with
  VIF attached

Signed-off-by: Yuval <[email-masked]>
---
  drivers/net/xen-netback/interface.c |    8 ++++++++
  1 file changed, 8 insertions(+)

diff --git a/drivers/net/xen-netback/interface.c 
b/drivers/net/xen-netback/interface.c
index 601ae2a..10751f5 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -179,6 +179,13 @@ static u32 xenvif_fix_features(struct net_device 
*dev, u32 features)
      return features;
  }

+static void xenvif_poll_controller(struct net_device *dev)
+{
+    disable_irq(dev->irq);
+    xenvif_interrupt(dev->irq, dev);
+    enable_irq(dev->irq);
+}
+
  static const struct xenvif_stat {
      char name[ETH_GSTRING_LEN];
      u16 offset;
@@ -237,6 +244,7 @@ static const struct net_device_ops xenvif_netdev_ops = {
      .ndo_stop    = xenvif_close,
      .ndo_change_mtu    = xenvif_change_mtu,
      .ndo_fix_features = xenvif_fix_features,
+    .ndo_poll_controller = xenvif_poll_controller,
  };

  struct xenvif *xenvif_alloc(struct device *parent, domid_t domid,
-- 
1.7.9.5