Subject: Re: [PATCH net-next 5/5] gianfar: Fix and cleanup Rx FCB handling

From: Paul Gortmaker <[email-masked]>
Date: Tue, 12 Feb 2013 12:19:24 -0500

On 13-02-12 07:47 AM, Claudiu Manoil wrote:
> NETIF_F_HW_VLAN_TX flag must not condition RxFCB usage.

The above statement isn't 100% clear to me.  Is this the intent?

  Currently, gfar_uses_fcb() calls gfar_is_vlan_on() which in turn
  checks NETIF_F_HW_VLAN_TX.  However there is no relation between
  whether FCBs are used and the VLAN transmit state.

> In the case of RxBD rings, FCBs (Frame Control Block) are inserted by
> the eTSEC whenever RCTRL[PRSDEP] is set to a non-zero value. Only one
> FCB is inserted per frame (in the buffer pointed to by the RxBD with
> bit F set). TOE acceleration for receive is enabled for all rx frames
> in this case.
> Indroduce the uses_rxfcb field to signal RxFCB insertion in accordance
> with the specification above (leading to cleaner, less confusing code).

The is_vlan_on() and uses_fcb() calls were more self documenting than
setting/clearing a new single use variable added to priv, I think.
Even if they get changed/simplified, perhaps it is worth keeping them?

Rather than a specific priv->uses_rxfcb field, perhaps it makes sense
to make it more future proof with priv->rctrl field, that is a cached
value of the register, and then you keep gfar_uses_fcb() and it in
turn checks for RCTRL_PRSDEP_INIT bit in rctrl?

Also, the dependency/conditional on FSL_GIANFAR_DEV_HAS_TIMER seems
to simply vanish with this patch, and it isn't clear to me if that
was 100% intentional or not...

P.
--

> 
> Cc: Paul Gortmaker <[email-masked]>
> Signed-off-by: Claudiu Manoil <[email-masked]>
> ---
>  drivers/net/ethernet/freescale/gianfar.c |   41 ++++++++++++++---------------
>  drivers/net/ethernet/freescale/gianfar.h |    1 +
>  2 files changed, 21 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
> index 59fb3bf..3de608c 100644
> --- a/drivers/net/ethernet/freescale/gianfar.c
> +++ b/drivers/net/ethernet/freescale/gianfar.c
> @@ -349,6 +349,9 @@ static void gfar_init_mac(struct net_device *ndev)
>  	/* Configure the coalescing support */
>  	gfar_configure_coalescing(priv, 0xFF, 0xFF);
>  
> +	/* set this when rx hw offload (TOE) functions are being used */
> +	priv->uses_rxfcb = 0;
> +
>  	if (priv->rx_filer_enable) {
>  		rctrl |= RCTRL_FILREN;
>  		/* Program the RIR0 reg with the required distribution */
> @@ -359,8 +362,10 @@ static void gfar_init_mac(struct net_device *ndev)
>  	if (ndev->flags & IFF_PROMISC)
>  		rctrl |= RCTRL_PROM;
>  
> -	if (ndev->features & NETIF_F_RXCSUM)
> +	if (ndev->features & NETIF_F_RXCSUM) {
>  		rctrl |= RCTRL_CHECKSUMMING;
> +		priv->uses_rxfcb = 1;
> +	}
>  
>  	if (priv->extended_hash) {
>  		rctrl |= RCTRL_EXTHASH;
> @@ -382,11 +387,15 @@ static void gfar_init_mac(struct net_device *ndev)
>  	}
>  
>  	/* Enable HW time stamping if requested from user space */
> -	if (priv->hwts_rx_en)
> +	if (priv->hwts_rx_en) {
>  		rctrl |= RCTRL_PRSDEP_INIT | RCTRL_TS_ENABLE;
> +		priv->uses_rxfcb = 1;
> +	}
>  
> -	if (ndev->features & NETIF_F_HW_VLAN_RX)
> +	if (ndev->features & NETIF_F_HW_VLAN_RX) {
>  		rctrl |= RCTRL_VLEX | RCTRL_PRSDEP_INIT;
> +		priv->uses_rxfcb = 1;
> +	}
>  
>  	/* Init rctrl based on our settings */
>  	gfar_write(&regs->rctrl, rctrl);
> @@ -505,20 +514,6 @@ void unlock_tx_qs(struct gfar_private *priv)
>  		spin_unlock(&priv->tx_queue[i]->txlock);
>  }
>  
> -static bool gfar_is_vlan_on(struct gfar_private *priv)
> -{
> -	return (priv->ndev->features & NETIF_F_HW_VLAN_RX) ||
> -	       (priv->ndev->features & NETIF_F_HW_VLAN_TX);
> -}
> -
> -/* Returns 1 if incoming frames use an FCB */
> -static inline int gfar_uses_fcb(struct gfar_private *priv)
> -{
> -	return gfar_is_vlan_on(priv) ||
> -	       (priv->ndev->features & NETIF_F_RXCSUM) ||
> -	       (priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER);
> -}
> -
>  static void free_tx_pointers(struct gfar_private *priv)
>  {
>  	int i;
> @@ -2331,10 +2326,13 @@ void gfar_check_rx_parser_mode(struct gfar_private *priv)
>  
>  	tempval = gfar_read(&regs->rctrl);
>  	/* If parse is no longer required, then disable parser */
> -	if (tempval & RCTRL_REQ_PARSER)
> +	if (tempval & RCTRL_REQ_PARSER) {
>  		tempval |= RCTRL_PRSDEP_INIT;
> -	else
> +		priv->uses_rxfcb = 1;
> +	} else {
>  		tempval &= ~RCTRL_PRSDEP_INIT;
> +		priv->uses_rxfcb = 0;
> +	}
>  	gfar_write(&regs->rctrl, tempval);
>  }
>  
> @@ -2367,6 +2365,7 @@ void gfar_vlan_mode(struct net_device *dev, netdev_features_t features)
>  		tempval = gfar_read(&regs->rctrl);
>  		tempval |= (RCTRL_VLEX | RCTRL_PRSDEP_INIT);
>  		gfar_write(&regs->rctrl, tempval);
> +		priv->uses_rxfcb = 1;
>  	} else {
>  		/* Disable VLAN tag extraction */
>  		tempval = gfar_read(&regs->rctrl);
> @@ -2395,7 +2394,7 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu)
>  		return -EINVAL;
>  	}
>  
> -	if (gfar_uses_fcb(priv))
> +	if (priv->uses_rxfcb)
>  		frame_size += GMAC_FCB_LEN;
>  
>  	frame_size += priv->padding;
> @@ -2766,7 +2765,7 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit)
>  	bdp = rx_queue->cur_rx;
>  	base = rx_queue->rx_bd_base;
>  
> -	amount_pull = (gfar_uses_fcb(priv) ? GMAC_FCB_LEN : 0);
> +	amount_pull = priv->uses_rxfcb ? GMAC_FCB_LEN : 0;
>  
>  	while (!((bdp->status & RXBD_EMPTY) || (--rx_work_limit < 0))) {
>  		struct sk_buff *newskb;
> diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h
> index 5304a58..386f1fe 100644
> --- a/drivers/net/ethernet/freescale/gianfar.h
> +++ b/drivers/net/ethernet/freescale/gianfar.h
> @@ -1061,6 +1061,7 @@ struct gfar_private {
>  	enum gfar_errata errata;
>  	unsigned int rx_buffer_size;
>  
> +	u16 uses_rxfcb;
>  	u16 padding;
>  
>  	/* HW time stamping enabled flag */
>