From: Stefan Priebe - Profihost AG <s.priebe@profihost•ag>
To: vyasevic@redhat•com
Cc: David Miller <davem@davemloft•net>,
Linux Netdev List <netdev@vger•kernel.org>
Subject: Re: VLAN filtering/VLAN aware bridge problems
Date: Wed, 13 Nov 2013 08:28:11 +0100 [thread overview]
Message-ID: <52832A0B.9030605@profihost.ag> (raw)
In-Reply-To: <5282B8E6.5090109@redhat.com>
Am 13.11.2013 00:25, schrieb Vlad Yasevich:
> On 11/12/2013 04:31 PM, Stefan Priebe wrote:
>> sorry for the very late response.
>>
>> Am 10.09.2013 16:11, schrieb Vlad Yasevich:
>>> On 08/30/2013 11:01 AM, Stefan Priebe - Profihost AG wrote:
>>>> Yes
>>>>
>>>
>>> Can you apply this patch and see if this fixes your problem.
>>> http://patchwork.ozlabs.org/patch/273841/
>>>
>>> In my attempts to reproduce your problem I didn't configuring filtering
>>> on the upper bridge, but that is what could have been causing
>>> your problem. I'll attempt it and let you know.
>>
>> Even with the complete patchset which was merged upstream it doesn't
>> work ;-(
>>
>> What's wrong there and / or how can i debug?
>
> Can you provide the filtering settings for both bridges you use?
I don't filter at all right now it's compiled in but not enabled - but i
have these problems since these patches were included.
It only start to work if i set the eth0 and eth1 (slaves of the bond) to
promisc mode. So the problem seems to be that the ethernet devices do
not accept the VLAN tagged packages.
Stefan
> Thanks
> -vlad
>
>>
>> Stefan
>>
>>> -vlad
>>>
>>>
>>>> Stefan
>>>>
>>>> This mail was sent with my iPhone.
>>>>
>>>> Am 30.08.2013 um 16:13 schrieb Vlad Yasevich <vyasevic@redhat•com>:
>>>>
>>>>> On 08/30/2013 03:24 AM, Stefan Priebe - Profihost AG wrote:
>>>>>> Am 29.08.2013 22:45, schrieb Vlad Yasevich:
>>>>>>> On 08/29/2013 08:50 AM, Stefan Priebe - Profihost AG wrote:
>>>>>>
>>>>>>>> The packets never reach the TAP device.
>>>>>>>>
>>>>>>>> Here is an output of ip a l (vlan 3021):
>>>>>>>
>>>>>>> Can you provide output of brctl show?
>>>>>>
>>>>>> Sure:
>>>>>> # brctl show
>>>>>> bridge name bridge id STP enabled interfaces
>>>>>> vmbr0 8000.00259084dea8 no bond0
>>>>>> tap320i0
>>>>>> vmbr1 8000.00259084deaa no bond1
>>>>>> vmbr1v3021 8000.00259084deaa no
>>>>>> tap320i1
>>>>>> vmbr1.3021
>>>>>
>>>>> so let me see if I can understand this configuration.
>>>>>
>>>>> vmbr1v3021 (bridge)
>>>>> / \
>>>>> tap320i1 vmbr1.3021 (vlan)
>>>>> \
>>>>> vmbr1 (bridge)
>>>>> \
>>>>> bond1
>>>>> \
>>>>> eth X
>>>>>
>>>>>
>>>>> Is that right? Is this the setup that has the problem you are
>>>>> describing?
>>>>>
>>>>> Thanks
>>>>> -vlad
>>>>>
>>>>>>> On the off chance that you are actually trying to configure vlan
>>>>>>> filtering, can you give this patch a try (net-2.6 tree):
>>>>>>>
>>>>>>> Author: Toshiaki Makita <makita.toshiaki@lab•ntt.co.jp>
>>>>>>> Date: Tue Aug 20 17:10:18 2013 +0900
>>>>>>>
>>>>>>> bridge: Use the correct bit length for bitmap functions in the
>>>>>>> VLAN
>>>>>>> code
>>>>>>>
>>>>>>> I don't think it made it to stable yet.
>>>>>>
>>>>>> I addd that patch and now the vlan stuff works at least on the host
>>>>>> node. But my tap devices still don't work.
>>>>>>
>>>>>> I also tried to attach the tap device on top of a vlan attached to
>>>>>> bond1
>>>>>> but then gvrp does not work anymore. The kernel announces gvrp once
>>>>>> and
>>>>>> then does not answer the query packets from the switch.
>>>>>>
>>>>>> Stefan
>>>>>
>>>
>
next prev parent reply other threads:[~2013-11-13 7:28 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-29 12:50 VLAN filtering/VLAN aware bridge problems Stefan Priebe - Profihost AG
2013-08-29 20:45 ` Vlad Yasevich
2013-08-30 7:24 ` Stefan Priebe - Profihost AG
2013-08-30 14:13 ` Vlad Yasevich
2013-08-30 15:01 ` Stefan Priebe - Profihost AG
2013-08-30 15:01 ` Stefan Priebe - Profihost AG
2013-09-10 14:11 ` Vlad Yasevich
2013-11-12 21:31 ` Stefan Priebe
2013-11-12 23:25 ` Vlad Yasevich
2013-11-13 7:28 ` Stefan Priebe - Profihost AG [this message]
2013-11-13 14:49 ` Vlad Yasevich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52832A0B.9030605@profihost.ag \
--to=s.priebe@profihost$(echo .)ag \
--cc=davem@davemloft$(echo .)net \
--cc=netdev@vger$(echo .)kernel.org \
--cc=vyasevic@redhat$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox