Subject: Re: [PATCH 1/1] iproute2: rsvp classifier support for multiple actions

From: John Fastabend <[email-masked]>
Date: Sun, 28 Sep 2014 10:39:17 -0700

On 09/28/2014 09:49 AM, Jamal Hadi Salim wrote:
> From: Jamal Hadi Salim <[email-masked]>
>
> Example setup:
>
> sudo tc qdisc del dev eth0 root handle 1:0 prio
> sudo tc qdisc add dev eth0 root handle 1:0 prio
>
> sudo tc filter add dev eth0 pref 10 proto ip parent 1:0 \
> rsvp session 10.0.0.1 ipproto icmp \
> classid 1:1  \
> action police rate 1kbit burst 90k pipe \
> action ok
>
> tc -s filter show dev eth0 parent 1:0
>
> filter protocol ip pref 10 rsvp
> filter protocol ip pref 10 rsvp fh 0x0001100a flowid 1:1 session
> 10.0.0.1 ipproto icmp
>          action order 1:  police 0x5 rate 1Kbit burst 23440b mtu 2Kb
> action pipe overhead 0b
> ref 1 bind 1
>          Action statistics:
>          Sent 98000 bytes 1000 pkt (dropped 0, overlimits 761 requeues 0)
>          backlog 0b 0p requeues 0
>
>          action order 2: gact action pass
>           random type none pass val 0
>           index 2 ref 1 bind 1 installed 60 sec used 3 sec
>          Action statistics:
>          Sent 74578 bytes 761 pkt (dropped 0, overlimits 0 requeues 0)
>          backlog 0b 0p requeues 0
>
> Signed-off-by: Jamal Hadi Salim <[email-masked]>
> ---

Thanks, this fixes the rsvp syntax.

Tested-by: John Fastabend <[email-masked]>

-- 
John Fastabend         Intel Corporation