Subject: Re: [PATCH net-next 2/2] net: phy: mdio-bcm-unimac: handle broken turn-around for specific PHYs

From: Florian Fainelli <[email-masked]>
Date: Wed, 10 Jun 2015 12:17:49 -0700

On 10/06/15 12:14, Florian Fainelli wrote:
> Some Ethernet PHYs/switches such as Broadcom's BCM53125 have a hardware bug
> which makes them not release the MDIO line during turn-around time.  This gets
> flagged by the UniMAC MDIO controller as a read failure, and we fail the read
> transaction.
> 
> Check the MDIO bus phy_ignore_ta_mask bitmask for the PHY we are reading
> from and if it is listed in this bitmask, ignore the read failure and
> proceed with returning the data we read out of the controller.

Scratch that version, it contains an unnecessary include and does not
have the same comment as the GENET version, let me resubmit that.

> 
> Signed-off-by: Florian Fainelli <[email-masked]>
> ---
>  drivers/net/phy/mdio-bcm-unimac.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/phy/mdio-bcm-unimac.c b/drivers/net/phy/mdio-bcm-unimac.c
> index 414fdf1f343f..2237d5554e02 100644
> --- a/drivers/net/phy/mdio-bcm-unimac.c
> +++ b/drivers/net/phy/mdio-bcm-unimac.c
> @@ -16,6 +16,7 @@
>  #include <linux/module.h>
>  #include <linux/io.h>
>  #include <linux/delay.h>
> +#include <linux/brcmphy.h>
>  
>  #include <linux/of.h>
>  #include <linux/of_platform.h>
> @@ -81,7 +82,7 @@ static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
>  		return -ETIMEDOUT;
>  
>  	cmd = __raw_readl(priv->base + MDIO_CMD);
> -	if (cmd & MDIO_READ_FAIL)
> +	if (!(bus->phy_ignore_ta_mask & 1 << phy_id) && (cmd & MDIO_READ_FAIL))
>  		return -EIO;
>  
>  	return cmd & 0xffff;
> 

-- 
Florian