Subject: Re: [PATCH net-next 3/9] phy: fixed_phy: Set supported speed in phydev

From: Florian Fainelli <[email-masked]>
Date: Sun, 23 Aug 2015 11:54:16 -0700

Le 08/23/15 02:46, Andrew Lunn a écrit :
> Set the supported field of the phydev to indicate the speed features
> of the phy. If the phy is never attached to a netdev, but used in an
> adjust_link() function, the speed will be incorrectly evaluated to
> 10/half rather than the correct speed/duplex.

As mentioned in patch 4, the behavior is not really specified before you
attach to the PHY device, and therefore configured by the PHY library,
still:

> 
> Signed-off-by: Andrew Lunn <[email-masked]>

Acked-by: Florian Fainelli <[email-masked]>
-- 
Florian