Subject: Re: ICMPv6 too big Packet will makes the network unreachable

From: Sheng Yong <[email-masked]>
Date: Wed, 14 Oct 2015 17:18:32 +0800

Hi, Rongqing,

Cced Martin KaFai Lau <[email-masked]>

It seems you trigger the problem that I met before, here is the link of disucssion:
http://www.spinics.net/lists/netdev/msg314717.html

You can try these patches to check if they resolve your problem:
7035870d1219 | 2015-05-03 | ipv6: Check RTF_LOCAL on rt->rt6i_flags instead of rt->dst.flags
653437d02f1f | 2015-04-28 | ipv6: Stop /128 route from disappearing after pmtu update

thanks,
Sheng

On 10/13/2015 3:09 PM, Li RongQing wrote:
> 1. Machine with 2001:1b70:82a8:18:650:65:0:2 address, and receive wrong
> icmp packets
>     root@du1:~# ifconfig
>     eth10.650 Link encap:Ethernet  HWaddr 74:c9:9a:a7:e5:88
>               inet6 addr: fe80::76c9:9aff:fea7:e588/64 Scope:Link
>               inet6 addr: 2001:1b70:82a8:18:650:65:0:2/80 Scope:Global
>               UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>               RX packets:1 errors:0 dropped:0 overruns:0 frame:0
>               TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
>               collisions:0 txqueuelen:0
>               RX bytes:104 (104.0 B)  TX bytes:934 (934.0 B)
> 
> 2. ICMPv6 packet is as below.
> 
>    ###[ Ethernet ]###
>      dst       = 74:C9:9A:A7:E5:88
>      src       = ae:4f:44:f2:10:cc
>      type      = 0x86dd
>    ###[ IPv6 ]###
>         version   = 6
>         tc        = 0
>         fl        = 0
>         plen      = None
>         nh        = ICMPv6
>         hlim      = 64
>         src       = 2001:1b70:82a8:18:650:65:0:4
>         dst       = 2001:1b70:82a8:18:650:65:0:2
> 
>    ###[ ICMPv6 Packet Too Big ]###
>            type      = Packet too big
>            code      = 0
>            cksum     = None
>            mtu       = 1280
> 
>    ###[ IPv6 ]###
>               version   = 6
>               tc        = 0
>               fl        = 0
>               plen      = None
>               nh        = ICMPv6
>               hlim      = 255
>               src       = 2001:1b70:82a8:18:650:65:0:2
>               dst       = 2001:1b70:82a8:18:650:65:0:2
>    ###[ ICMPv6 Neighbor Discovery - Neighbor Advertisement ]###
>                  type      = Neighbor Advertisement
>                  code      = 0
>                  cksum     = None
>                  R         = 1
>                  S         = 0
>                  O         = 1
>                  res       = 0x0
>                  tgt       = 2001:1b70:82a8:18:650:65:0:2
> 
>    ##### Test #####
> 
> 3. Send ICMPv6  with Scapy to trigger fault.
> 
>    conf.iface='eth1'
>    eth = Ether(src='ae:4f:44:f2:10:cc', dst='74:C9:9A:A7:E5:88')
>    base = IPv6(src='2001:1b70:82a8:18:650:65:0:4',
> dst='2001:1b70:82a8:18:650:65:0:2')
>    ptb = ICMPv6PacketTooBig(type=2)
>    packet = eth/base/ptb
>    ptb_payload_na_base = IPv6(src='2001:1b70:82a8:18:650:65:0:2',
> dst='2001:1b70:82a8:18:650:65:0:2')
>    ptb_payload_na = ICMPv6ND_NA(type=136, tgt='2001:1b70:82a8:18:650:65:0:2')
>    ptb_payload = ptb_payload_na_base/ptb_payload_na
>    packet = packet/ptb_payload
>    sendp(packet, iface="eth1.650", count=1)
> 
> 4.  route information  will enter the faulty state after Wait 600 seconds,
> 
>    root@du1:~# ip route get 2001:1b70:82a8:18:650:65:0:2
>    local 2001:1b70:82a8:18:650:65:0:2 dev lo  proto none  src
> 2001:1b70:82a8:18:650:65:0:2  metric 0  expires 7sec mtu 1280
> 
>    root@du1:~# ip route get 2001:1b70:82a8:18:650:65:0:2
>    local 2001:1b70:82a8:18:650:65:0:2 dev lo  proto none  src
> 2001:1b70:82a8:18:650:65:0:2  metric 0  expires 3sec mtu 1280
> 
>    root@du1:~# ip route get 2001:1b70:82a8:18:650:65:0:2
>    2001:1b70:82a8:18:650:65:0:2 dev eth10.650  src
> 2001:1b70:82a8:18:650:65:0:2  metric 0
>        cache
>    root@du1:~#
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to [email-masked]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> .
>