From: John Holland <jotihojr@gmail•com>
To: intel-wired-lan@lists•osuosl.org, netdev@vger•kernel.org
Subject: [Intel-wired-lan] [next] igb: allow setting MAC address on i211 using a device tree blob V3
Date: Wed, 17 Feb 2016 07:43:07 +0100 [thread overview]
Message-ID: <56C4167B.7080705@gmail.com> (raw)
Hello,
The Intel i211 LOM pcie ethernet controllers' iNVM operates as an OTP
and has no externel EEPROM interface [1]. The following allows the
driver to pickup the MAC address from a device tree blob when CONFIG_OF
has been enabled.
[1]http://www.intel.com/content/www/us/en/embedded/products/networking/i211-ethernet-controller-datasheet.html
Changes V2
- Restrict searching for compatible devices to current pci device.
Changes V3
- Add device tree binding documentation.
Signed-off-by: John Holland<jotihojr@gmail•com>
---
Documentation/devicetree/bindings/net/intel,i210.txt | 36 ++++++++++++++++++++++++++++++++++++
drivers/net/ethernet/intel/igb/igb_main.c | 30 ++++++++++++++++++++++++++++++
2 files changed, 66 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/intel,i210.txt b/Documentation/devicetree/bindings/net/intel,i210.txt
new file mode 100644
index 0000000..d6ac8d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/intel,i210.txt
@@ -0,0 +1,36 @@
+* Intel I210, I211 PCIe bus controller
+
+Required properties:
+- compatible: must be "intel,i210" as described in
+ Documentation/devicetree/bindings/net/phy.txt;
+
+Optional properties:
+- local-mac-address: as described in
+ Documentation/devicetree/bindings/net/ethernet.txt;
+- mac-address: as described in
+ Documentation/devicetree/bindings/net/ethernet.txt;
+
+Child nodes of this PCIe bus controller node are a subset
+of the standard Ethernet PHY device nodes.
+
+Example:
+
+/*
+ * Set a valid MAC address from the u-boot environment variable eth1addr.
+ * The resulting value may be viewed under
+ * <sysfs>/firmware/devicetree/base/soc/pcie@0x01000000/i211@bus1/
+ */
+
+#include "imx6q.dtsi";
+
+/ {
+ aliases {
+ ethernet1 = ð1;
+ };
+};
+
+&pcie {
+ eth1: i211@bus1 {
+ compatible = "intel,i210";
+ };
+};
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 31e5f39..f7788fa 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -56,6 +56,11 @@
#include <linux/i2c.h>
#include "igb.h"
+#ifdef CONFIG_OF
+#include <linux/of_net.h>
+#include <linux/etherdevice.h>
+#endif
+
#define MAJ 5
#define MIN 3
#define BUILD 0
@@ -2216,6 +2221,26 @@ static s32 igb_init_i2c(struct igb_adapter *adapter)
return status;
}
+#ifdef CONFIG_OF
+/**
+ * igb_read_mac_addr_dts - Read mac address from the device tree blob
+ * @dev: pointer to device structure
+ * @mac_addr: pointer to found mac address
+ **/
+static void igb_read_mac_addr_dts(const struct device *dev, u8 *mac_addr)
+{
+ const u8 *mac;
+ struct device_node *dn;
+
+ dn = of_find_compatible_node(dev->of_node, NULL, "intel,i210");
+ if (dn) {
+ mac = of_get_mac_address(dn);
+ if (mac)
+ ether_addr_copy(mac_addr, mac);
+ }
+}
+#endif
+
/**
* igb_probe - Device Initialization Routine
* @pdev: PCI device information struct
@@ -2420,6 +2445,11 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (hw->mac.ops.read_mac_addr(hw))
dev_err(&pdev->dev, "NVM Read Error\n");
+#ifdef CONFIG_OF
+ if (!is_valid_ether_addr(hw->mac.addr))
+ igb_read_mac_addr_dts(&pdev->dev, hw->mac.addr);
+#endif
+
memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len);
if (!is_valid_ether_addr(netdev->dev_addr)) {
next reply other threads:[~2016-02-17 6:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-17 6:43 John Holland [this message]
2016-02-17 21:24 ` [Intel-wired-lan] [next] igb: allow setting MAC address on i211 using a device tree blob V3 Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56C4167B.7080705@gmail.com \
--to=jotihojr@gmail$(echo .)com \
--cc=intel-wired-lan@lists$(echo .)osuosl.org \
--cc=netdev@vger$(echo .)kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox