Subject: Re: [PATCH-RFC] drivers: net: ethernet: intel: e1000e: fix ethtool autoneg off for fiber

From: Daniel Walker <[email-masked]>
Date: Wed, 30 Mar 2016 12:34:58 -0700

So Intel maintainers (Jeff, Jesse, Shannon, Carolyn, Don, Bruce, and John)

I'm assuming no comments means this patch is acceptable , and I will 
resubmit it without the RFC. Is that acceptable ?

On 03/25/2016 02:58 PM, Daniel Walker wrote:
> From: Steve Shih <[email-masked]>
>
> This patch fixes the issues for disabling auto-negotiation and forcing
> speed and duplex settings for the fiber media.
>
> For fiber media, e1000_get_settings should return ETH_TP_MDI_INVALID for
> eth_tp_mdix_ctrl instead of ETH_TP_MDI_AUTO so subsequent e1000_set_settings
> call would not fail with -EOPNOTSUPP.
>
> e1000_set_spd_dplx should not automatically turn autoneg back on for forced
> 1000 Mbps full duplex settings.
>
> Cc: [email-masked]
> Cc: [email-masked]
> Signed-off-by: Steve Shih <[email-masked]>
> ---
>   drivers/net/ethernet/intel/e1000e/ethtool.c | 6 ++++--
>   1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
> index 6cab1f3..cd03dcd 100644
> --- a/drivers/net/ethernet/intel/e1000e/ethtool.c
> +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
> @@ -201,6 +201,9 @@ static int e1000_get_settings(struct net_device *netdev,
>   	else
>   		ecmd->eth_tp_mdix_ctrl = hw->phy.mdix;
>   
> +	if (hw->phy.media_type != e1000_media_type_copper)
> +		ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_INVALID;
> +
>   	return 0;
>   }
>   
> @@ -236,8 +239,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
>   		mac->forced_speed_duplex = ADVERTISE_100_FULL;
>   		break;
>   	case SPEED_1000 + DUPLEX_FULL:
> -		mac->autoneg = 1;
> -		adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
> +		mac->forced_speed_duplex = ADVERTISE_1000_FULL;
>   		break;
>   	case SPEED_1000 + DUPLEX_HALF:	/* not supported */
>   	default: