Subject: [PATCH] Marvell phy: add fiber status check for some components

From: Charles-Antoine Couret <[email-masked]>
Date: Fri, 1 Apr 2016 18:33:48 +0200

>>From a5a7a9828511ff6a522cf742109768207ff89929 Mon Sep 17 00:00:00 2001
From: Charles-Antoine Couret <[email-masked]>
Date: Fri, 1 Apr 2016 16:16:35 +0200
Subject: [PATCH] Marvell phy: add fiber status check for some components

This patch is not tested with all Marvell's phy. The new function was actived
only for tested phys.

Signed-off-by: Charles-Antoine Couret <[email-masked]>
---
 drivers/net/phy/marvell.c | 37 +++++++++++++++++++++++++++++++++++--
 1 file changed, 35 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index ab1d0fc..5ac186e 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -890,6 +890,39 @@ static int marvell_read_status(struct phy_device *phydev)
 	return 0;
 }
 
+/* marvell_read_fiber_status
+ *
+ * Some Marvell's phys have two modes: fiber and copper.
+ * Both need status checked.
+ * Description:
+ *   First, check the fiber link and status.
+ *   If the fiber link is down, check the copper link and status which
+ *   will be the default value if both link are down.
+ */
+static int marvell_read_fiber_status(struct phy_device *phydev)
+{
+	int err;
+
+	/* Check the fiber mode first */
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_FIBER);
+	if (err < 0)
+		return err;
+
+	err = marvell_read_status(phydev);
+	if (err < 0)
+		return err;
+
+	if (phydev->link)
+		return 0;
+
+	/* If fiber link is down, check and save copper mode state */
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER);
+	if (err < 0)
+		return err;
+
+	return marvell_read_status(phydev);
+}
+
 static int marvell_aneg_done(struct phy_device *phydev)
 {
 	int retval = phy_read(phydev, MII_M1011_PHY_STATUS);
@@ -1122,7 +1155,7 @@ static struct phy_driver marvell_drivers[] = {
 		.probe = marvell_probe,
 		.config_init = &m88e1111_config_init,
 		.config_aneg = &marvell_config_aneg,
-		.read_status = &marvell_read_status,
+		.read_status = &marvell_read_fiber_status,
 		.ack_interrupt = &marvell_ack_interrupt,
 		.config_intr = &marvell_config_intr,
 		.resume = &genphy_resume,
@@ -1270,7 +1303,7 @@ static struct phy_driver marvell_drivers[] = {
 		.probe = marvell_probe,
 		.config_init = &marvell_config_init,
 		.config_aneg = &m88e1510_config_aneg,
-		.read_status = &marvell_read_status,
+		.read_status = &marvell_read_fiber_status,
 		.ack_interrupt = &marvell_ack_interrupt,
 		.config_intr = &marvell_config_intr,
 		.did_interrupt = &m88e1121_did_interrupt,
-- 
2.5.5