Subject: Re: [PATCH net-next] mpls: allow routes on ipgre devices

From: Robert Shearman <[email-masked]>
Date: Thu, 16 Jun 2016 14:12:47 +0100

On 16/06/16 09:09, Simon Horman wrote:
> This appears to be necessary and sufficient to provide
> MPLS in GRE (RFC4023) support.
>
> This can be used by establishing an ipgre tunnel device
> and then routing MPLS over it.
>
> The following example will forward MPLS frames received with an outermost
> MPLS label 100 over tun1, a GRE tunnel. The forwarded packet will have the
> outermost MPLS LSE removed and two new LSEs added with labels 200
> (outermost) and 300 (next).
>
> ip link add name tun1 type gre remote 10.0.99.193 local 10.0.99.192 ttl 225
> ip link set up dev tun1
> ip addr add 10.0.98.192/24 dev tun1
> ip route sh
>
> echo 1 > /proc/sys/net/mpls/conf/eth0/input
> echo 101 > /proc/sys/net/mpls/platform_labels
> ip -f mpls route add 100 as 200/300 via inet 10.0.98.193
> ip -f mpls route sh
>
> Also remove unnecessary braces.
>
> Reviewed-by: Dinan Gunawardena <[email-masked]>

Thanks for testing this and making the necessary change.

Acked-by: Robert Shearman <[email-masked]>

> Signed-off-by: Simon Horman <[email-masked]>