Subject: Re: [net-next PATCH 1/2] net: pktgen: support injecting packets for qdisc testing

From: Jamal Hadi Salim <[email-masked]>
Date: Thu, 30 Jun 2016 06:21:26 -0400

On 16-06-29 03:47 PM, John Fastabend wrote:
> Add another xmit_mode to pktgen to allow testing xmit functionality
> of qdiscs. The new mode "queue_xmit" injects packets at
> __dev_queue_xmit() so that qdisc is called.
>
> Signed-off-by: John Fastabend <[email-masked]>
> ---
>   net/core/pktgen.c |   42 ++++++++++++++++++++++++++++++++++++++++--
>   1 file changed, 40 insertions(+), 2 deletions(-)
>
> diff --git a/net/core/pktgen.c b/net/core/pktgen.c
> index f74ab9c..4b3d467 100644
> --- a/net/core/pktgen.c
> +++ b/net/core/pktgen.c
> @@ -213,6 +213,7 @@
>   /* Xmit modes */
>   #define M_START_XMIT		0	/* Default normal TX */
>   #define M_NETIF_RECEIVE 	1	/* Inject packets into stack */
> +#define M_QUEUE_XMIT		2	/* Inject packet into qdisc */
>
>   /* If lock -- protects updating of if_list */
>   #define   if_lock(t)           spin_lock(&(t->if_lock));
> @@ -626,6 +627,8 @@ static int pktgen_if_show(struct seq_file *seq, void *v)
>
>   	if (pkt_dev->xmit_mode == M_NETIF_RECEIVE)
>   		seq_puts(seq, "     xmit_mode: netif_receive\n");
> +	else if (pkt_dev->xmit_mode == M_QUEUE_XMIT)
> +		seq_puts(seq, "     xmit_mode: xmit_queue\n");
>
>   	seq_puts(seq, "     Flags: ");
>
> @@ -1142,8 +1145,10 @@ static ssize_t pktgen_if_write(struct file *file,
>   			return len;
>
>   		i += len;
> -		if ((value > 1) && (pkt_dev->xmit_mode == M_START_XMIT) &&
> -		    (!(pkt_dev->odev->priv_flags & IFF_TX_SKB_SHARING)))
> +		if ((value > 1) &&
> +		    ((pkt_dev->xmit_mode == M_QUEUE_XMIT) ||
> +		     ((pkt_dev->xmit_mode == M_START_XMIT) &&
> +		     (!(pkt_dev->odev->priv_flags & IFF_TX_SKB_SHARING)))))
>   			return -ENOTSUPP;
>   		pkt_dev->burst = value < 1 ? 1 : value;
>   		sprintf(pg_result, "OK: burst=%d", pkt_dev->burst);
> @@ -1198,6 +1203,9 @@ static ssize_t pktgen_if_write(struct file *file,
>   			 * at module loading time
>   			 */
>   			pkt_dev->clone_skb = 0;
> +		} else if (strcmp(f, "queue_xmit") == 0) {
> +			pkt_dev->xmit_mode = M_QUEUE_XMIT;
> +			pkt_dev->last_ok = 1;
>   		} else {
>   			sprintf(pg_result,
>   				"xmit_mode -:%s:- unknown\nAvailable modes: %s",
> @@ -3434,6 +3442,36 @@ static void pktgen_xmit(struct pktgen_dev *pkt_dev)
>   #endif
>   		} while (--burst > 0);
>   		goto out; /* Skips xmit_mode M_START_XMIT */
> +	} else if (pkt_dev->xmit_mode == M_QUEUE_XMIT) {
> +		local_bh_disable();
> +		atomic_add(burst, &pkt_dev->skb->users);
> +
> +		ret = dev_queue_xmit(pkt_dev->skb);
> +		switch (ret) {
> +		case NET_XMIT_SUCCESS:
> +			pkt_dev->sofar++;
> +			pkt_dev->seq_num++;
> +			pkt_dev->tx_bytes += pkt_dev->last_pkt_size;
> +			break;
> +		case NET_XMIT_DROP:
> +		case NET_XMIT_CN:
> +		/* These are all valid return codes for a qdisc but
> +		 * indicate packets are being dropped or will likely
> +		 * be dropped soon.
> +		 */
> +		case NETDEV_TX_BUSY:
> +		/* qdisc may call dev_hard_start_xmit directly in cases
> +		 * where no queues exist e.g. loopback device, virtual
> +		 * devices, etc. In this case we need to handle
> +		 * NETDEV_TX_ codes.
> +		 */
> +		default:
> +			pkt_dev->errors++;
> +			net_info_ratelimited("%s xmit error: %d\n",
> +					     pkt_dev->odevname, ret);
> +			break;
> +		}
> +		goto out;
>   	}
>
>   	txq = skb_get_tx_queue(odev, pkt_dev->skb);
>

Acked-by: Jamal Hadi Salim <[email-masked]>

In travel mode, dont have much cycles right now - but can you review
again:
http://www.spinics.net/lists/netdev/msg359545.html
I think you should disallow clone for example and i wasnt sure if you
covered all error scenarios etc.

cheers,
jamal