Subject: Re: [PATCH net-next v2 1/7] net: dsa: qca8k: Add QCA8334 binding documentation

From: Michal <[email-masked]>
Date: Tue, 22 May 2018 22:50:11 +0200

On 22.5.2018 21:40, Rob Herring wrote:
> On Tue, May 22, 2018 at 01:16:26PM +0200, Michal Vokáč wrote:
>> Add support for the four-port variant of the Qualcomm QCA833x switch.
>>
>> The CPU port default link settings can be reconfigured using
>> a fixed-link sub-node.
>>
>> Signed-off-by: Michal Vokáč <[email-masked]>
>> ---
>> Changes in v2:
>>   - Add commit message and document fixed-link binding.
>>
>>   .../devicetree/bindings/net/dsa/qca8k.txt          | 23 +++++++++++++++++++++-
>>   1 file changed, 22 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
>> index 9c67ee4..15b9057 100644
>> --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
>> +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
>> @@ -2,7 +2,10 @@
>>   
>>   Required properties:
>>   
>> -- compatible: should be "qca,qca8337"
>> +- compatible: should be one of:
>> +    "qca,qca8334"
>> +    "qca,qca8337"
>> +
>>   - #size-cells: must be 0
>>   - #address-cells: must be 1
>>   
>> @@ -14,6 +17,20 @@ port and PHY id, each subnode describing a port needs to have a valid phandle
>>   referencing the internal PHY connected to it. The CPU port of this switch is
>>   always port 0.
>>   
>> +A CPU port node has the following optional property:
> 
> s/property/node/
> 
> Otherwise,
> 
> Reviewed-by: Rob Herring <[email-masked]>

Good catch, I will correct this.
Thanks for the review Rob.

Michal