From: Vincent Bernat <bernat@luffy•cx>
To: netdev@vger•kernel.org
Subject: Re: [PATCH] Fix "ip -6 route add ... nexthop"
Date: Thu, 06 Sep 2012 19:53:46 +0200 [thread overview]
Message-ID: <87a9x3vxzp.fsf@guybrush.luffy.cx> (raw)
In-Reply-To: <1346952649-5716-2-git-send-email-bernat@luffy.cx> (Vincent Bernat's message of "Thu, 6 Sep 2012 19:30:49 +0200")
❦ 6 septembre 2012 19:30 CEST, Vincent Bernat <bernat@luffy•cx> :
> IPv6 multipath routes were not accepted by "ip route" because an IPv4
> address was expected for each gateway. Use `get_addr()` instead of
> `get_addr32()`.
Well, looking at the kernel, I have just discovered that there is no
support for IPv6 multipath. This explains a lot of things for me and
this patch is therefore useless (but could still be applied for future
purposes?).
--
panic("CPU too expensive - making holiday in the ANDES!");
2.2.16 /usr/src/linux/arch/mips/kernel/traps.c
next prev parent reply other threads:[~2012-09-06 18:01 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-06 17:30 IPv6 multipath routes Vincent Bernat
2012-09-06 17:30 ` [PATCH] Fix "ip -6 route add ... nexthop" Vincent Bernat
2012-09-06 17:53 ` Vincent Bernat [this message]
2012-09-12 8:29 ` [RFC PATCH net-next 0/1] Add support of ECMPv6 Nicolas Dichtel
2012-09-12 8:29 ` [RFC PATCH net-next 1/1] ipv6: add support of ECMP Nicolas Dichtel
2012-09-12 8:48 ` YOSHIFUJI Hideaki
2012-09-12 9:42 ` YOSHIFUJI Hideaki
2012-09-12 9:53 ` Nicolas Dichtel
2012-09-14 7:59 ` [RFC PATCH net-next v2 0/1] Add support of ECMPv6 Nicolas Dichtel
2012-09-14 7:59 ` [RFC PATCH net-next v2 1/1] ipv6: add support of ECMP Nicolas Dichtel
2012-09-14 9:40 ` [RFC PATCH net-next v2 0/1] Add support of ECMPv6 Vincent Bernat
2012-09-14 13:35 ` Nicolas Dichtel
2012-09-14 13:37 ` Nicolas Dichtel
2012-10-15 12:36 ` Vincent Bernat
2012-10-15 19:54 ` Vincent Bernat
2012-09-19 9:18 ` [PATCH net-next v3 " Nicolas Dichtel
2012-09-19 9:18 ` [PATCH net-next v3 1/1] ipv6: add support of ECMP Nicolas Dichtel
2012-09-20 21:15 ` David Miller
2012-09-21 9:59 ` [PATCH net-next v4 0/1] Add support of ECMPv6 Nicolas Dichtel
2012-09-21 9:59 ` [PATCH net-next v4 1/1] ipv6: add support of ECMP Nicolas Dichtel
2012-09-21 17:48 ` [PATCH net-next v4 0/1] Add support of ECMPv6 David Miller
2012-09-24 12:28 ` Nicolas Dichtel
2012-10-01 13:56 ` [PATCH net-next v5 " Nicolas Dichtel
2012-10-01 13:56 ` [PATCH net-next v5 1/1] ipv6: add support of ECMP Nicolas Dichtel
2012-10-01 16:47 ` Joe Perches
2012-10-02 16:02 ` [PATCH net-next v6 0/1] Add support of ECMPv6 Nicolas Dichtel
2012-10-02 16:02 ` [PATCH net-next v6 1/1] ipv6: add support of equal cost multipath (ECMP) Nicolas Dichtel
2012-10-02 16:06 ` Nicolas Dichtel
2012-10-02 16:14 ` Eric Dumazet
2012-10-19 9:13 ` [PATCH net-next v7 0/1] Add support of ECMPv6 nicolas.dichtel
2012-10-19 9:13 ` [PATCH net-next v7 1/1] ipv6: add support of equal cost multipath (ECMP) nicolas.dichtel
2012-10-22 0:41 ` David Miller
2012-10-22 13:42 ` [PATCH net-next v8 0/1] Add support of ECMPv6 nicolas.dichtel
2012-10-22 13:42 ` [PATCH net-next v8 1/1] ipv6: add support of equal cost multipath (ECMP) nicolas.dichtel
2012-10-23 6:39 ` David Miller
2012-10-23 12:42 ` [PATCH iproute2 1/2] ip: fix "ip -6 route add ... nexthop" Nicolas Dichtel
2012-10-23 12:42 ` [PATCH iproute2 2/2] ip: remove NLM_F_EXCL in case of ECMPv6 routes Nicolas Dichtel
2012-10-25 16:06 ` Stephen Hemminger
2012-10-25 16:20 ` Nicolas Dichtel
2012-10-25 16:25 ` Stephen Hemminger
2012-10-25 16:48 ` Nicolas Dichtel
2012-11-02 8:58 ` [RESEND PATCH net-next] ipv6/multipath: remove flag NLM_F_EXCL after the first nexthop Nicolas Dichtel
2012-11-03 1:38 ` David Miller
2012-11-05 8:30 ` Nicolas Dichtel
2012-10-25 16:08 ` [PATCH iproute2 1/2] ip: fix "ip -6 route add ... nexthop" Stephen Hemminger
2012-10-02 18:43 ` [PATCH net-next v6 1/1] ipv6: add support of equal cost multipath (ECMP) David Miller
2012-09-11 12:57 ` IPv6 multipath routes Ulrich Weber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87a9x3vxzp.fsf@guybrush.luffy.cx \
--to=bernat@luffy$(echo .)cx \
--cc=netdev@vger$(echo .)kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox