Subject: Re: [PATCH 9/9] arm64: marvell: dts: add xmdio nodes for 7k/8k

From: Gregory CLEMENT <[email-masked]>
Date: Wed, 07 Jun 2017 10:43:49 +0200

Hi Dave,
 
 On mer., juin 07 2017, Antoine Tenart <[email-masked]> wrote:

> Add the description of the xMDIO bus for the Marvell Armada 7k and
> Marvell Armada 8k; for both CP110 slave and master. This bus is found
> on Marvell Ethernet controllers and provides an interface with the
> xMDIO bus.
>

If you agrees with this series please don't apply this patch. I will
take care of it. We have many changes in the dt directory for the next
release and I want that all the change are in the same place to take
care of the merge conflict.

Thanks,

Gregory

> Signed-off-by: Antoine Tenart <[email-masked]>
> ---
>  arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 7 +++++++
>  arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi  | 7 +++++++
>  2 files changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> index 037ed30d75a7..95953743455e 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> @@ -98,6 +98,13 @@
>  				clocks = <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>;
>  			};
>  
> +			cpm_xmdio: mdio@12a600 {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				compatible = "marvell,xmdio";
> +				reg = <0x12a600 0x10>;
> +			};
> +
>  			cpm_icu: interrupt-controller@1e0000 {
>  				compatible = "marvell,cp110-icu"; 
>  				reg = <0x1e0000 0x10>;
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> index 2a99ff8fca2a..594356243ddb 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> @@ -103,6 +103,13 @@
>  				clocks = <&cps_syscon0 1 9>, <&cps_syscon0 1 5>;
>  			};
>  
> +			cps_xmdio: mdio@12a600 {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				compatible = "marvell,xmdio";
> +				reg = <0x12a600 0x10>;
> +			};
> +
>  			cps_icu: interrupt-controller@1e0000 {
>  				compatible = "marvell,cp110-icu";
>  				reg = <0x1e0000 0x10>;
> -- 
> 2.9.4
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com